Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

1350 CV driveshaft for yoke, not flange?

Discussion in 'The Garage' started by TX Mudder, Dec 10, 2002.

  1. TX Mudder

    TX Mudder 1/2 ton status

    Joined:
    Jul 10, 2000
    Posts:
    2,514
    Likes Received:
    0
    Location:
    Houston
    Is there such a thing as a 1350 CV that is not made for a flange (like 77-up NP205s) but instead for a yoke (like 76-down NP205's)?
    I emailed two driveline places and never got a response.
    My 205 has a 1310 front yoke and i want to put the 1350 yoke on and run a 1350 CV.
    -- Mike
     
  2. u2slow

    u2slow 1/2 ton status

    Joined:
    May 9, 2001
    Posts:
    2,217
    Likes Received:
    0
    Location:
    BC Canada
    A 1350 series 10-spline CV yoke is probably going to be a custom item.

    If you swap over to a F0rd NP205 output, you'll have a 32-spline output and 1330-series CV yoke. If that's not enough, you can put on a regular 1350 (from GM rear output)or 1410 (from Dodge rear ouput) since both are 32-spline, and just run a non-CV shaft (angle permitting).
     

Share This Page