Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

1991 Blazer K5 Dana 60 14FF 39.5 Iroks

Discussion in 'Complete Vehicles' started by JT_9250, Jun 1, 2006.

  1. JT_9250

    JT_9250 Newbie

    Joined:
    Mar 8, 2005
    Posts:
    3
    Likes Received:
    0
    Location:
    Aurora
    I have a 1991 Chevy Fullsize Blazer for sale this was the last year of production for this body style. The exterior is straight and rust free, the truck does have the typical GM paint flaws but the body underneath is solid. The fenders have been slightly trimmed for tire clearance. The interior is in good shape for it's age, the truck does need a dashpad and the rear carpet needs to be cleaned due to the spare tire. The 350 TBI and 700R4 transmission are all stock and unmodified and are in good working order. The rest of the drivetrain has been heavily modified for wheelin'. Here is the breakdown of what I have done:
    • Dana 60 front axle(82-87) 35 spline inners and Warn Premium Lockouts (4.10 Gear)
    • 39.50X13.50X17 Super Swamper Iroks (50% Tread in rear)
    • 17X9.5 GM Hummer H2 Wheels (Super light!)
    • 14 Bolt FF Rear axle which has been converted to discs using all new parts and ORD brackets
    • Yukon 4.88 Gearset (Rear)
    • Yukon Spool (Rear)
    • Crane High Clearance Diff Cover (8630 Chromolly Steel, Super strong!)
    • Shaved housing for extra ground clearance
    • JB Conversions NP241 Slip Yoke Eliminator (2.72 low range)
    • High Angle Driveline CV Driveshaft 1410 Yoke .120" Tubing
    • High Angle Driveline Transfer case mounted park brake (Not yet installed)
    • 4 inch lift springs in front ORD Shackle Flip in rear
    • ORD Front Shackles
    • ORD Steering Box Brace
    • 1 Ton Master Cylinder (Good Pedal Feel)
    • 38" TSL Spare tire
    • GMC Front Grill
    • Factory Power mirrors
    • Custom Built rear bumper and receiver welded in front to put a shackle in
    I am looking to get $5500 for the truck which I think is fair considering the amount of work that has already been done to it.

    The truck will need a few things to be complete, it needs crossover steering and gears installed in the front. I was planning on putting a locker in the front but it is up to the buyer. I can install 4.88 on a open carrier or buyer can put whatever they would like in. I have a 8 lug 10 bolt and 14 bolt Drum rear if buyer would like to swap out the 14 Bolt disc rear and 60 front and buy the truck at a lower price.

    Email me for additional pics and I can be reached anytime @ 720 427-2299.

    IMG_1065.JPG

    IMG_1072.JPG

    IMG_1069.JPG

    IMG_1077.JPG

    IMG_1079.JPG
     
  2. chevy_muscle

    chevy_muscle 1/2 ton status

    Joined:
    Mar 16, 2004
    Posts:
    103
    Likes Received:
    0
    Location:
    Murphy, tx
  3. JT_9250

    JT_9250 Newbie

    Joined:
    Mar 8, 2005
    Posts:
    3
    Likes Received:
    0
    Location:
    Aurora
    Unfortunately it didn't sell the deal didn't work out. I have listed the truck again on ebay, I really need to sell it soon.
     

Share This Page