Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

400/205 adaptor tires and wheels more

Discussion in 'General Parts for Sale' started by b454rat, Apr 19, 2007.

  1. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Gonna start some spring cleaning, and dont' need these, so they are the first to go. Dunno what the stuff is worth, so PM me.

    400/205 adaptor, off an 81 crew, 8 track pattern. No rust, cracks, threads still good, bolts were torched out, one of which I took out with my fingers. Shifter was torched just inside the cab, but what's left is still bolted to the adaptor.

    35x14.5x16.5s on Eagle 589s, 16.5x9.75, 8 lugs. Not sure of the b/s, can find out this weekend. Tires are in good shape, not dry rotted, even tread wear, maybe 60%. IIRC they are Dick Cepek, think Baja. They are bias belted, louder than he!! going down the road, but no flat spots. Good for alot of road time, only took them offroad once, but they did OK.

    315/75/16 Radial Claws. Just the tires, but I think I can get some 8 lug Eagle 589, 16x8s. Two are wore funny, they were on a Ford. But the best tires might be 50%. Good for driver, rolling around, tire swing for the kids, etc.

    205 case, off the 81 crew with 400, but no input shaft. I took that so I can FINALLY get my truck going again. Turns freely, shifts good, but it's hard since the shifter is a little challenged. Still has the alum or stainless tag on the PTO cover bolts, just says 205, year and ratio. It has fixed rear output. MIght take the yoke, not sure what size is on the Ford case that is in my truck.

    Superlift 8" front springs, for 73 and newer GMs. They are on my truck, but haven't drivin on them yet. They have bushing. I bought these used off Pirate, and they weren't that old then, IIRC the truck went taller. Maybe couple months use.

    Ultra alum wheels, 15x10, Ford/Dodge 5 lug. These wheels are new. The had tires on them for about 4-5 months, and were on the truck not even a week. My old man had a Dodge that I bought the wheels for, the truck wasn't lifted, and with the 33s they rubbed on the inner fender. So they came off, sat in the garage for who knows how long, sold the 33s, now they sit in the shed. They have centers. Think they are 151 series, 5 spoke design. Nice looking wheel, almost want them for my Blazer when I SAS it. I bought these wheels when I was stationed in DC, I think it was 99/00. They've been sitting ever since!!

    I will get pics of the stuff this weekend, it's actually gonna be nice!!!!! PM me or call if you want details or whatever. 607-237-0067. Thanks Joe.
     
  2. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Make some offers on this stuff, it all needs to go. I don't want to ship any of this, shipping is becoming a major PITA, inless you set it up. I can ship the adaptor tho.
     
  3. lifted86k-10

    lifted86k-10 Registered Member

    Joined:
    Dec 5, 2006
    Posts:
    24
    Likes Received:
    0
    Location:
    South Carolina
    how much are you asking for the springs ill setup shipping
     
  4. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    $150. Small stuff like that I can ship, UPS doesn't pitch too much of a fit. I'm having a real hard time shipping a Dana 60. I've shipped about 10 of these and never had any problems. Just for some reason, it's giving me fits!!! Just to let you know, they are still on the truck, so it will take a little bit to get them off. I didn't get a chance to take any pics, but will this week if I can get out of work in time and remains nice outside.
     
  5. lifted86k-10

    lifted86k-10 Registered Member

    Joined:
    Dec 5, 2006
    Posts:
    24
    Likes Received:
    0
    Location:
    South Carolina
    ok well I'm not in a real big hurry, can you get pics of the springs
     
  6. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Just wanted to let you know that they weren't ready to be shipped yet. I'll get some hopefully tomorrow.
     
  7. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Got out of work late so didn't get a chance for pics, should be able to get some tomorrow.

    I also have a 32 spline input, 400/205, off 86 crew cab, 6 bolt round pattern.
     
  8. 1-tonmudder

    1-tonmudder 1/2 ton status

    Joined:
    Apr 24, 2005
    Posts:
    3,052
    Likes Received:
    0
    Location:
    In a junkyard somewhere
    How much on the adapter,is the input short or long and how much??Shipped to 37743
     
  9. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    I dunno on the adaptor, can't find any to compare prices. It is friggin clean though. For the input, it's off an 86, so it is the long style, 6 bolt round pattern. Shipping shouldn't be that much, shipped an adaptor to Cali and that was only $20 and change....
     
  10. 1-tonmudder

    1-tonmudder 1/2 ton status

    Joined:
    Apr 24, 2005
    Posts:
    3,052
    Likes Received:
    0
    Location:
    In a junkyard somewhere
    Do you have the 6 bolt adapter also??
     
  11. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Nope sold that. Might be able to get another, need to do some checkin'....
     
  12. 1-tonmudder

    1-tonmudder 1/2 ton status

    Joined:
    Apr 24, 2005
    Posts:
    3,052
    Likes Received:
    0
    Location:
    In a junkyard somewhere
    Let me know.
     
  13. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    Might hit a yard this weekend, let you know Sunday...
     
  14. imiceman44

    imiceman44 1 ton status

    Joined:
    Aug 5, 2002
    Posts:
    15,160
    Likes Received:
    1
    Location:
    Sacramento, CA
    That would be me :D
     
  15. b454rat

    b454rat 1/2 ton status Premium Member

    Joined:
    Jan 21, 2003
    Posts:
    3,009
    Likes Received:
    7
    Location:
    Binghamton NY
    I was wondering what that was about....lol

    The 205 will be complete, gonna take the input out of the Ford t-case and put it back in the GM 205. So it will be the 205 and 400/205 adaptor, 8 track style. I thought I had pics of them, but danged if I can find it.....
     

Share This Page