So I got in Wimpy and went to push the clutch pedal in and it just went to the floor with no resistance. Hmm says I as it was ten at night and well there is work in the morning. Thought to myself must just be the the little adjuster thingy lock nut had backed off and that little pointed screw chingus had vibrated out of adjustment. Well it was at it's end and yet did not contact the throwout arm. Once again, hmmm says I. Well I pull it off the little actuator arm and low and behold the little adjuster thingy was worn almost all the way through. This time damnit says I. But wait I have a welder. Break the durn thing out weld up the worn out area, grind off the high spots and once again almost as good as new. Just thought I'd share a quick "fix".