Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

CV Front in Auto trans Blazer?

Discussion in '1973-1991 K5 Blazer | Truck | Suburban' started by RedDwarf, Aug 21, 2001.

  1. RedDwarf

    RedDwarf 1/2 ton status

    Joined:
    May 9, 2001
    Posts:
    816
    Likes Received:
    0
    Location:
    North Central Florida
    I have a front driveshaft that was given to me, could it be from a Blazer with an automatic?

    It has the saginaw CV with 4 hole flange, and it measues 28.5" collapsed.

    Lift It, Lock It, LIVE IT!!!
     
  2. LittlePig

    LittlePig 1/2 ton status

    Joined:
    Aug 9, 2000
    Posts:
    299
    Likes Received:
    0
    Location:
    East Texas
    Almost positive it is. My auto front shaft had the saginaw CV, and was about that long. I had a 203 transfer case.

    Email: littlepig@keepandbeararms.com
    ICQ: 84108805
     
  3. RedDwarf

    RedDwarf 1/2 ton status

    Joined:
    May 9, 2001
    Posts:
    816
    Likes Received:
    0
    Location:
    North Central Florida
    Thank you LittlePig. That is just what I was looking for.
    This Blazer would have had the 350/203 combo as well.
    Thanks again

    Lift It, Lock It, LIVE IT!!!
     
  4. Emmettology 101

    Emmettology 101 3/4 ton status

    Joined:
    May 9, 2000
    Posts:
    8,126
    Likes Received:
    0
    Location:
    FL
    Is the flange on the t-case end round or square?

    i htink the flange for 203's are square and I know my 208 flange is round.

    Mike

    <font color=green>"It's like a sore dick deal, You cant beat it!"</font color=green>

    <a target="_blank" href=http://www.geocities.com/emmettology101>www.geocities.com/emmettology101</a>
     
  5. LittlePig

    LittlePig 1/2 ton status

    Joined:
    Aug 9, 2000
    Posts:
    299
    Likes Received:
    0
    Location:
    East Texas
  6. SWAMPRNR

    SWAMPRNR 1/2 ton status

    Joined:
    Apr 7, 2001
    Posts:
    296
    Likes Received:
    0
    Location:
    Temple Texas
    The Front Shaft Off My 208 Looks Like That.The Flange On The Shaft Is Round And The Flange On The Case Is Square.About The Same Lenght Also.

    A Big Hammer Can Fix Anything ..
     
  7. RedDwarf

    RedDwarf 1/2 ton status

    Joined:
    May 9, 2001
    Posts:
    816
    Likes Received:
    0
    Location:
    North Central Florida
    Hey guys, I was able to trade the stock auto shaft for a lengthened shaft that will fit my application(plus a little $$ of course).

    I thank you for your replies.

    Lift It, Lock It, LIVE IT!!!
     

Share This Page