Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Desperately need a measurement big block guys and big caddy guys

Discussion in 'The Garage' started by cybrfire, May 18, 2004.

  1. cybrfire

    cybrfire 1 ton status Vendor GMOTM Winner

    Joined:
    Dec 15, 2002
    Posts:
    15,139
    Likes Received:
    565
    Location:
    Iowa
    From the water pump pulley face to the furthest forward crossmember in your K5 can somebody please help me out here?
     
  2. Highjaxx

    Highjaxx 1/2 ton status

    Joined:
    Apr 17, 2002
    Posts:
    273
    Likes Received:
    0
    Location:
    Austin,Texas
    I got 1.5" from the crank pulley to the first x-member. I have a '92 454 with the single belt, ORD motor mounts, and missouri off-road engine x-member. Oh ya, no body lift.

    Water pump was no where near the crossmember, unless you had a HUGE body lift.

    Hope this helps. /forums/images/graemlins/thinking.gif
     
  3. dhdescender

    dhdescender 1/2 ton status

    Joined:
    Aug 10, 2002
    Posts:
    628
    Likes Received:
    0
    Location:
    Qualicum Beach, British Columbia, Canada - Eh.
    I can get my caddy measurments soon, but I'll warn you I shoved my 472 WAY back into my firewall, I even trimmed a bit. Most have trouble clearing the oil filter on the x-member, and mine wasn't anywhere near touching.

    So you want a horizontal measurment fromt he front face of the water pump pulley, to the nearest x member below it?

    Will do...
     

Share This Page