Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

hub bearings problem

Discussion in '1969-1972 K5 Blazer | Truck | Suburban' started by R72K5, Nov 1, 2001.

  1. R72K5

    R72K5 Banned

    Joined:
    Mar 5, 2001
    Posts:
    8,905
    Likes Received:
    0
    Location:
    central IL
    Was there a change in the size of the hub bearings between 71 and 79 ? Got a guy who cant get a 72 rotor to go on his axle, says the bearings in the 72 hub are too small for his spindle.

    '72 K-5 4x4, CST, 3.07, 4 speed, NP 205, 31' x 10.5", converting to 2wd and pickup body(I did not want to do this- rust made me do it)
     
  2. Triaged

    Triaged 1/2 ton status

    Joined:
    Feb 21, 2001
    Posts:
    3,808
    Likes Received:
    0
    Location:
    CA (LA/OC area)
    You might want to PM thatK30guy...he knows all that stuff.

    '71 Blazer CST w/ a 400sbc, 4" lift, 36" Supper Swampers, and alot of rust
    <a target="_blank" href=http://community.webshots.com/user/triaged>See it Here </a>
     
  3. R72K5

    R72K5 Banned

    Joined:
    Mar 5, 2001
    Posts:
    8,905
    Likes Received:
    0
    Location:
    central IL
    will do ! thanks !

    '72 K-5 4x4, CST, 3.07, 4 speed, NP 205, 31' x 10.5", converting to 2wd and pickup body(I did not want to do this- rust made me do it)
     

Share This Page