Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Is this a dana rear 60 FF?

Discussion in 'The Garage' started by Skyetone, Apr 11, 2002.

  1. Skyetone

    Skyetone 1/2 ton status

    Joined:
    Apr 10, 2002
    Posts:
    118
    Likes Received:
    0
    Location:
    SLC Utah
  2. thatK30guy

    thatK30guy 1 ton status Premium Member

    Joined:
    Jan 12, 2001
    Posts:
    32,076
    Likes Received:
    55
    Location:
    .
    Wow!! You are making this too hard on yourself and us, too!! /forums/images/icons/tongue.gif

    Just get some pics and post them up for us to view. We will be able to tell you what they are if you get pics up. /forums/images/icons/wink.gif
     
  3. Skyetone

    Skyetone 1/2 ton status

    Joined:
    Apr 10, 2002
    Posts:
    118
    Likes Received:
    0
    Location:
    SLC Utah
    Man if I had a digital...I tell ya!!
    The rear is a 14bolt FF
    The diff is kicked off to the pass side...The pinion has five bolts holding it into the housing...
    ANYONE have pix of the front of there 60?
     
  4. Hossbaby50

    Hossbaby50 3/4 ton status

    Joined:
    Sep 1, 2001
    Posts:
    8,972
    Likes Received:
    0
    Location:
    Peoria, AZ
    Are you sure the axle is full width. Same width as a 14bff? It could be a D60 out of a Heep J30 or something like that that has offset pinion and is a D60 or 70. Or it could be a rear out of a M971 or whatever the rear out of the 1 ton military Heep was. It might have been offset and full width.
     
  5. Skyetone

    Skyetone 1/2 ton status

    Joined:
    Apr 10, 2002
    Posts:
    118
    Likes Received:
    0
    Location:
    SLC Utah
    hell I DUNNO /forums/images/icons/laugh.gif Where do I measure again?
     
  6. Hossbaby50

    Hossbaby50 3/4 ton status

    Joined:
    Sep 1, 2001
    Posts:
    8,972
    Likes Received:
    0
    Location:
    Peoria, AZ
    Measure from wheel mounting surface to wheel mounting surface.
     

Share This Page