Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Looking for 4.56 gears, etc

Discussion in 'Parts & Trucks Wanted' started by Jmask, Jan 26, 2002.

  1. Jmask

    Jmask Registered Member

    Joined:
    Jan 16, 2002
    Posts:
    82
    Likes Received:
    0
    Location:
    Port Angeles, Wa
    For front dana 44 and rear. Also looking for susp. lift(4"), rear locker for a GM 12 bolt rear end, front bench seat with console. I have 3 350 SBC's(1 4blt- bored .30 over) bare, 400 crank & pston rods, 350 crank & pistons, 3.42 gears for 12 bolt diff, 10 bolt r/e, 15x12 rims, 3 sets of 350 heads(1 stock, 2 hi perf; one of which is camel hump heads with screw in studs and new rockers ready to bolt on), new edelbrock 650 performer carb(100 miles on it actually) 308 cam(.533 lift)-used for 50 miles. plus other items I can use for trade bait. Please let's deal!

    Alex
    78 K5 Blazer 355SBC SM465 NP205 Dana44 w/track-loc and warn hubs GM 12 bolt in rear 33/15's
     
  2. Seventy4Blazer

    Seventy4Blazer 3/4 ton status

    Joined:
    Apr 21, 2001
    Posts:
    5,634
    Likes Received:
    0
    Location:
    Escondido, CA
    i got a set of stock heads. 50 dollars. i have two different ones to choose from. i can get the numbers tomorrow if you want
    Grant

    1974 Chevy Blazer Cheyanne. but it is on 33's now, with saggy old springs. i am in Yuma Arizona if ya got any parts for me.
     
  3. RootBreaker

    RootBreaker 3/4 ton status Premium Member

    Joined:
    Nov 29, 2001
    Posts:
    5,118
    Likes Received:
    173
    Location:
    Williamstown, NJ USA
    wow that is one big list.....
    [​IMG]


    1978 Chevy 3/4 - 14" leafs -dana 44w/4.56's -14 bolt corp w/4.56's on 40x17x16.5 Ground Hawgs on 16.5x12 steel rims-NP205&SMC465
     
  4. RootBreaker

    RootBreaker 3/4 ton status Premium Member

    Joined:
    Nov 29, 2001
    Posts:
    5,118
    Likes Received:
    173
    Location:
    Williamstown, NJ USA
    hey wait a minute !!!!
    I think I was confused.. is alot of that stuff up for trade or the ol' american green?
    if so I have a 1991 caprice 350 9c1 motor I am putting into my truck. It has a hydro roller cam/lifter setup. How much for the 400 stuff... that would get me to a 383 stroker? right? if so what else would I need for the 383 stroker? also the 1991 motor I have is a vortec block, will the high perf heads you have work on my block? also what gain would I get and what is the casting number?

    now if i read it wrong and that stuff is all what you are looking for.. i appologize....


    1978 Chevy 3/4 - 14" leafs -dana 44w/4.56's -14 bolt corp w/4.56's on 40x17x16.5 Ground Hawgs on 16.5x12 steel rims-NP205&SMC465
     

Share This Page