NP208 - just came off my 86 K-5, good condition, needs cleaning. Was working great, just swapped out for a 241 with SYE. Driveline - 31-1/4" from u-joint to u-joint. Stock NP208 slip yoke on one end, full 1350 yoke on other end. U-joints have about 500 miles on them. Drawtite Class V hitch - in good condition, with all bolts for installation. There is a 4" drop hitch attached to it to...I lost the key to get the darn thing off $60 obo 4" tapered lift blocks - These are from a Tuff Country 4" lift kit (for the rear, of course). I used them for about a year, but removed them when I installed a shackle flip $15 obo Front sway bar. Just removed it for some extra flex. In good condition. Has newer energy suspension bushings, have about 800 miles on them (1 years use) $25 obo 31 gallon fuel tank - Just removed this to install a 31 gallon EFI tank. This one has no sumps and would be for a carburated K-5. Still has a working sending unit too. $40 obo Still has gas in it! 1227747 ECM with ACSK prom. $40obo Charcoal canister from 90 camaro 305TBI. Should work on most that require canister with purge valve. $30obo 87 TBI distributor. Good condition. Never ran it, though. Came with a complete TBI setup but I was able to use my existing unit. $30obo Shipping for the blocks or shackle mounts would be from Gilroy, CA 95020. I think shipping would kill the deal on the other parts.