Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Need some measurements/specs

Discussion in 'The Garage' started by thatK30guy, Feb 1, 2007.

  1. thatK30guy

    thatK30guy 1 ton status Premium Member

    Joined:
    Jan 12, 2001
    Posts:
    32,076
    Likes Received:
    55
    Location:
    .
    Anyone who's got an aftermarket winch bumper like a Warn or Ramsey.......

    I need the depth and height of the inside of the "box" area where the winch sits in such said bumper. The measurements of it as if it were side view of "L".
    And then the length of the box from frame horn to frame horn.

    I'm trying to design a winch mount for a local so I can get it fabbed up at the high school.

    I had a Warn bumper once and thought the specs were something like 6" high by 10" or 12" deep. Need someone with the bumper on hand to get me an exact measurement.

    Thanks guys! You rock! :bow:
     
  2. AZ79K5Project

    AZ79K5Project 1/2 ton status

    Joined:
    Jan 15, 2006
    Posts:
    2,082
    Likes Received:
    0
    Location:
    Arizona
    Here are some pics with a measuring tape in front. This is an OLD Warn winch bumper that was not made for a Blazer.
    P1010801 (Large).JPG P1010802 (Large).JPG P1010808 (Large).JPG P1010809 (Large).JPG

    P1010801 (Large).JPG

    P1010802 (Large).JPG

    P1010808 (Large).JPG

    P1010809 (Large).JPG
     
  3. AZ79K5Project

    AZ79K5Project 1/2 ton status

    Joined:
    Jan 15, 2006
    Posts:
    2,082
    Likes Received:
    0
    Location:
    Arizona
    Last two pics
    P1010813 (Large).JPG

    P1010814 (Large).JPG

    I still need to protect the wires on the install.

    P1010813 (Large).JPG

    P1010814 (Large).JPG
     
  4. Jason4x4

    Jason4x4 1/2 ton status

    Joined:
    Nov 5, 2006
    Posts:
    4,505
    Likes Received:
    6
    Location:
    Chandler, AZ
    this one is 8" tall, 6 1/2" deep, 28" wide frame horn to frame horn

    HPIM0022.JPG
     

Share This Page