Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

np 241 rebuild questions

Discussion in 'The Garage' started by mudman83, Feb 19, 2006.

  1. mudman83

    mudman83 1/2 ton status Premium Member

    Joined:
    Feb 11, 2004
    Posts:
    141
    Likes Received:
    0
    Location:
    Mesa, AZ
    I started rebuilding my 241 a few months ago. Which means I tore it down and didn't touch it until today because I had other problems. I started putting it together today, and noticed that the bearings can be pressed down to different depths in some spots and I don't remember how far they should go in. Is there a good rebuild book or some specs at how far the bearings should be pressed on? Should I replace the snap rings or are they safe to reuse? Also at the time I thought I wanted a mechanical speedo, but now I realized that my mechanical is pathetic and inaccurate and I want to go electronic with autometer. What would I need for my t-case to go electronic speedo?

    I did a search but nothing answered my questions.

    Thanks,
    Kyle
     
  2. mudman83

    mudman83 1/2 ton status Premium Member

    Joined:
    Feb 11, 2004
    Posts:
    141
    Likes Received:
    0
    Location:
    Mesa, AZ
    anyone?
     
  3. Chaddy

    Chaddy 1/2 ton status GMOTM Winner

    Joined:
    May 23, 2005
    Posts:
    4,110
    Likes Received:
    2
    Location:
    Salt Lake City,Utah
    you need the whole output nose from a 90-91 for the speedo and never reuse the snaprings..
     
  4. mudman83

    mudman83 1/2 ton status Premium Member

    Joined:
    Feb 11, 2004
    Posts:
    141
    Likes Received:
    0
    Location:
    Mesa, AZ
    Ok thanks,
    Anyone know about the bearings?
     

Share This Page