Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Replacing 76 blazer rear quarter

Discussion in 'The Garage' started by rodriscoll, Nov 2, 2006.

  1. rodriscoll

    rodriscoll Registered Member

    Joined:
    Feb 7, 2003
    Posts:
    18
    Likes Received:
    0
    Location:
    Townsend, MA
    Replacing 76 blazer rear quarter
    I am getting mixed answers on the web how hard is it to replace rear quarters I keep hearing they just unbolt I know there are spot welds at door at least and probably the rear where the taillight are anybody done this. My other option is to half quareter but would rather do the whole thing if possible.
     
  2. 73k5blazer

    73k5blazer Unplug the matrix cable from the back of your head Premium Member

    Joined:
    Dec 28, 2001
    Posts:
    4,987
    Likes Received:
    38
    Location:
    The Rustbelt
    There are some spotwelds and what they call 'sealer'. Spotwelds I know are up front, to the b-pillar, and a some to the floor near the back. . It's not hard if you've plotted the time and have the skill. It's not a couple hour job. Get yourself a spotweld drill bit (a tiny hole saw of sorts) and it goes pretty fast. IThere's some bolts as well. It's pretty obvious where it's welded when you get it down to bare metal and start taking it apart.
     

Share This Page