Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

Stock K5 parts, diesel parts, D60 stock steering arm....

Discussion in 'General Parts for Sale' started by 88K5Jimmy, Jun 24, 2003.

  1. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    (6) Monroe shocks for stock K5 $30
    Stock front leaf springs (2 leaves) $25
    Stock front leaf speings (3 leaves) $30 <font color="red"> SOLD </font>
    (2 pairs) stock front shackles $10
    Stock swaybar off m1008 $20
    6.2L battery trays (both) $10 <font color="red"> SOLD </font>
    6.2L diesel air cleaner (no hardware) $10
    NP208 shifter $20
    (2) flange style front CV's only $20 each
    Stock D60 steering arm $20
    Stock 10 bolt steering arm $10
    Stock tie rod off m1008 $20

    Stock rear driveshaft off my 88 K5 (NP208). Recently new slip yoke, upper spicer u-joint and lower conversion 1350 spicer u-joint. Can provide measurments if needed.
    $65

    Can get pics if interested. Prices do not include shipping.

    Thanks
     
  2. rugger03

    rugger03 1/2 ton status

    Joined:
    May 14, 2000
    Posts:
    829
    Likes Received:
    0
    Location:
    around
    How are the battery trays, rust etc? and passenger side correct? i call dibs.
     
  3. edeslaur1

    edeslaur1 1/2 ton status

    Joined:
    Jun 23, 2003
    Posts:
    193
    Likes Received:
    0
    Location:
    Oregon City, OR, 97045
    PM'd/e-mailed you. It's late, I'm punchy. /forums/images/graemlins/rolleyes.gif
     
  4. alec78

    alec78 1/2 ton status

    Joined:
    Aug 5, 2002
    Posts:
    358
    Likes Received:
    0
    Location:
    Washington
    What kinda shape are the 3 leaf leaf springs in? Could you get me rough deminsions and weight (trying to figure shipping(looks like about $20))? If they will take away the negative arch I have, I'll take 'um!! Let me know what kinda shipping options you have (unless you want to meet in the middle)

    Alec78
     
  5. alec78

    alec78 1/2 ton status

    Joined:
    Aug 5, 2002
    Posts:
    358
    Likes Received:
    0
    Location:
    Washington
    please ignore this post. Don't ignore the one for getting the springs.
     
  6. edeslaur1

    edeslaur1 1/2 ton status

    Joined:
    Jun 23, 2003
    Posts:
    193
    Likes Received:
    0
    Location:
    Oregon City, OR, 97045
    OK, let's try here. /forums/images/graemlins/smile.gif

    Send me a pic for the air cleaner &amp; let me know what "no hardware" means plz.

    TIA,
    Eric D
    88 K5 -&gt; http://www.lvmt.net/1988k5/page_01.htm
     
  7. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    [ QUOTE ]
    How are the battery trays, rust etc? and passenger side correct? i call dibs.


    [/ QUOTE ]

    Battery trays have some light surface rust here and there where the factory coating has come off. A good cleaning and painting would be good. Yes, they are the passenger side. Here is a pic:
    [​IMG]

    [ QUOTE ]
    PM'd/e-mailed you. It's late, I'm punchy.

    [/ QUOTE ]
    Emailed you about the air cleaner and sent some pics too. No hardware means, no snorkle, studs, or wingnuts.

    [ QUOTE ]
    What kinda shape are the 3 leaf leaf springs in? Could you get me rough deminsions and weight (trying to figure shipping(looks like about $20))? If they will take away the negative arch I have, I'll take 'um!! Let me know what kinda shipping options you have (unless you want to meet in the middle)

    [/ QUOTE ]

    The leaf springs are in good shape from what we can tell. They were on an 86 m1008 with 44,000 miles on it. When we got the m1008, it was sitting up well and didn't have an engine, tranny or t-case. The springs measure 46 3/4" eye to eye and 3" wide at the spring eyes. They weigh approximately 90lbs, so that should give you an idea on shipping. My zip is 74134 if you want to figure shipping. Here is a pic:
    [​IMG]

    Dog not included /forums/images/graemlins/wink.gif

    Thanks
    Ross
     
  8. rugger03

    rugger03 1/2 ton status

    Joined:
    May 14, 2000
    Posts:
    829
    Likes Received:
    0
    Location:
    around
    hey thanks for the pic, im going to pass didnt know they were out of a cucv. I have a set of those already.
     
  9. 6.2Blazer

    6.2Blazer 1/2 ton status

    Joined:
    Feb 24, 2000
    Posts:
    4,675
    Likes Received:
    26
    Location:
    Ohio
    I'm interested in the rear driveshaft. Can you send me the measurements?
     
  10. alec78

    alec78 1/2 ton status

    Joined:
    Aug 5, 2002
    Posts:
    358
    Likes Received:
    0
    Location:
    Washington
    Sent you a PM on the springs!
     
  11. DPI

    DPI 1/2 ton status

    Joined:
    Jun 22, 2000
    Posts:
    2,792
    Likes Received:
    1
    Location:
    In the Burbs close to Tulsa, OK
    I'll take those battery trays if they are not spoken for. Can you check on shipping to BA, OK 74014?
    Thanks

    [edit] Just heard you work in Sapulpa. Maybe I could just pick them up?[/edit]
     
  12. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    [ QUOTE ]
    I'm interested in the rear driveshaft. Can you send me the measurements?

    [/ QUOTE ]

    I will get measurements after I get home from work

    [ QUOTE ]
    I'll take those battery trays if they are not spoken for. Can you check on shipping to BA, OK 74014?
    Thanks

    [edit] Just heard you work in Sapulpa. Maybe I could just pick them up?[/edit]

    [/ QUOTE ]

    You are next in line for the trays. If you want them they are yours. I actually live in Tulsa and work in Sapulpa. My dad bought your 36's from you, so I'm sure we can work something out on picking them up. I'll see after I get home from work if my dad still has your number and we can go from there.
     
  13. DPI

    DPI 1/2 ton status

    Joined:
    Jun 22, 2000
    Posts:
    2,792
    Likes Received:
    1
    Location:
    In the Burbs close to Tulsa, OK
    Sounds good! /forums/images/graemlins/thumb.gif
     
  14. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    [ QUOTE ]
    I'm interested in the rear driveshaft. Can you send me the measurements?

    [/ QUOTE ]

    Here ya go:

    29 1/4" ctr u-joint to ctr u-joint
    37 1/2" end to end
    6" slip yoke


    DP 90K5
    PM me with your number and we can arrange something for the trays.


    Thanks
    Ross
     
  15. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    Updated on original post
     
  16. 88K5Jimmy

    88K5Jimmy 1/2 ton status

    Joined:
    Jan 10, 2001
    Posts:
    1,323
    Likes Received:
    0
    Location:
    Tulsa OK
    Up again
     

Share This Page