Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

TORQUE SPEC. CHECK

Discussion in 'The Garage' started by jackedjimmy, Jul 30, 2002.

  1. jackedjimmy

    jackedjimmy 1/2 ton status

    Joined:
    May 18, 2002
    Posts:
    195
    Likes Received:
    0
    Location:
    Redmond WA
    Iam about to asseble my engine and tranns and lower it onto the frame of my 81 jimmy. There are a few torque specs that i need to know and that i couldn't find after looking in my chilton's manual.

    It's and 89' SBC going in a 81'jimmy with a th350 and np205 combo that i dont know th year.

    these are the things that i have found:

    .engine to flexplate bolts= 75 ft/lbs
    .bell housing bolts= 34 ft/lbs
    .torque converter to flexplate bolts= 50 ft/lbs


    Things i need to know:
    .Motor mount to engine block spec
    .2nd piece of motor mount to frame spec
    .all spring bushing (greesable) spec
    .ORD steering box brace spec
    .tranny to t-case spec

    These are things i couldn't fnd in my crappy chilton's book.
    I don't see why they dont just have a table of specs that covers everything!!!

    Any information greatly apreciated.
     
  2. jackedjimmy

    jackedjimmy 1/2 ton status

    Joined:
    May 18, 2002
    Posts:
    195
    Likes Received:
    0
    Location:
    Redmond WA
  3. jackedjimmy

    jackedjimmy 1/2 ton status

    Joined:
    May 18, 2002
    Posts:
    195
    Likes Received:
    0
    Location:
    Redmond WA
    ttt again
     

Share This Page