Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE t-shirt and membership sticker when you sign up for a Premium Membership and choose the recurring plan.

vaccum help

Discussion in 'The Garage' started by adamforsythe, Jul 4, 2005.

  1. adamforsythe

    adamforsythe 1/2 ton status

    Joined:
    Oct 16, 2004
    Posts:
    1,394
    Likes Received:
    0
    Location:
    Maine
    Hello,
    I just got the tranny and engine into my '86 blazer. I have about 90% of everything hooked up. But behind the carb there is a T valve/fitting one of the vaccum hoses that run from that goes down to the tranny. But where does the smaller one go? I think on the old engine that was in the truck ran to the carb. But in my '85 there was a small tube the ran from the fire wall and hooked up to it.
     
  2. dave_90_blazer

    dave_90_blazer 1/2 ton status

    Joined:
    Jan 1, 2004
    Posts:
    688
    Likes Received:
    0
    Location:
    Melvindale, Michigan
    hook up the line from the firewall to it, that is how the heater changes vent/floor/defrost
     
  3. adamforsythe

    adamforsythe 1/2 ton status

    Joined:
    Oct 16, 2004
    Posts:
    1,394
    Likes Received:
    0
    Location:
    Maine
    The only line that is coming from the firewall has wires in it. But it is coming from the same place that the hose came out on my '85 that hooked up to that T valve. Should I hook it up and see what happens?
    Thanks
    Adam
     

Share This Page