1976 Chevy Blazer Rockcrawler

[rem]

As you can see from the pictures the truck has dents and rust. The drivetrain is what would be worth putting under another rig or keep building this one. I do not currently have the time or money. The rear is a 12 bolt with 4.56 ring & pinion, Detroit, and Moser axles. The front is a Dana 44 with 4.56 ring & pinion, Detroit, Warn axles, and CTM u-joints. As you can see from the pics it has high steer and a 6 point roll-cage. The lift is a 6" Skyjacker and tires are 37" Goodyear MTR's. The engine is ok for the age, but does use some oil. It needs a front ring gear. I am asking $3,250. It is located in Rifle, CO. 970-261-3094 or 970-625-3192

 

[trollporter]

Is that cage a kit or custom?

 

[BIG*RED]

great googly moogly..i need a bigger monitor to see these pics!!!

 

[rem]

The cage is custom and it was done by Ultimate Off-road in Grand Junction, CO

 

[rem]

Sorry about the size of the pics. I tried to crop them and that did not work

 

[rem]

Questions or offers from anyone? I would hope that I could get more than a grand out of the truck even though 1/2 ton running gear is not the most desirable

 

[Wicked Wolf Auto]

if you part it out let me know there are a ton of parts I could use!

 

[fourwheelerjeff]

Questions or offers from anyone? I would hope that I could get more than a grand out of the truck even though 1/2 ton running gear is not the most desirable

i would give you a grand for the truck

 

[rem]

I really don't want to part it out yet, but it may come down to that

 

[rem]

The Detroit's are worth a grand by themselves

 

[tRustyK5]

Steering looks a little scary...

Rene

 

[rem]

The arms on top of the knuckles are flat, they are not bent in like it may look from the pictures.

 

[tRustyK5]

The foot long bolt holding it all together is the scary part, that and the extendo pipe welded to the arm...

Rene

 

[rem]

That is one thing that I have never been too thrilled about either. I think that the guy that did it should have not stacked the two on top of each other. The little extendo pipes was about the only way to get it high enough to clear the springs

 

[rem]

I will take $2,850 for the truck. Anyone interested?

 

[85mudblazin]

If you part it out ill take the CTM's

 

[rem]

I don't have a good place to let the truck sit to part it out.

 

[rem]

$2,700 anyone?

 

[rem]

$2,500 anyone?

 

[muddybuddy]

you wont get top dollar for vehicles on here. try selling it locally, in the paper and in autotrader. I'm sure its worth more than $2500 but on here with so many different built up trucks cheap, it makes it hard.

good luck bump