Dismiss Notice

Welcome To CK5!

Registering is free and easy! Hope to see you on the forums soon.

Score a FREE Membership sticker when you sign up for a Premium Membership and choose the recurring plan.

203 question

Discussion in 'The Garage' started by khotmer, Sep 23, 2003.

  1. khotmer

    khotmer 1/2 ton status

    Oct 23, 2002
    Likes Received:
    columbus, oh
    Okay i am cleaning up a 203 in prep for my rig and i took the shifter off(most of it) there are 2 linkages. the shifter only seemns to move one of them (the outer). when i move the intter one it seem to do the following
    all the way back on the front yoke moves
    Middle both yokes move
    all the way forward seem to be low gear as both yoles move but are tighter than middle setting....

    I looked in the books I havea and tries to do a search but there is SO many post on the 203 that i could be here for a month and still never find the right post.

    any help on what this is would be great. why doesnt he sifter move the second linkage or am i doing something wrong....

    Thanks in advance guys & gals!
  2. BorregoK5

    BorregoK5 1/2 ton status

    Sep 7, 2001
    Likes Received:
    San Marcos, Ca USA
    The shift stick itself moves the two rods at the same time via a that small box attached to the t-case. Your shifter has LOW at opposite ends of the main shifters throw so look for an attatchment point which arcs, starts at one side moves away and comes back.

Share This Page