DEMON44
Low-Tech Redneck
...
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
.......
- Thread starter DEMON44
- Start date
MaxPF
1/2 ton status
Damn nice! 
So, these are cascaded turbos (i.e. the discharge of the HT4C blows into the inlet of the HX40), correct? How much boost will this give?
So, these are cascaded turbos (i.e. the discharge of the HT4C blows into the inlet of the HX40), correct? How much boost will this give?
MaxPF
1/2 ton status
Yup, you're gonna need o-rings 
So, are you gonna try for the 1000HP club?
So, are you gonna try for the 1000HP club?
Big91RustyBucket
1/2 ton status
That is pimip .
BKinzey
1/2 ton status
So did you get a kit or did you have to custom fab it?
How are you getting to the intake manifold
How are you getting to the intake manifold
now swap that into a k5 or k30 and that would be tits!!!!
What a beast!!!
When does the vid get posted of you liquifying the tires?
Rene
When does the vid get posted of you liquifying the tires?
Rene
BKinzey
1/2 ton status
Awww just poke a hole in the hood for the pop-off valve
I was wondering how you routed your piping to the intake manifold. Do you have an intercooler? I'm guessing the path is forward to an intercooler and comes out on the driver's side to the intake manifold. At first I thought it might be running down & behind the crossmember and back up to the intake.
I was wondering how you routed your piping to the intake manifold. Do you have an intercooler? I'm guessing the path is forward to an intercooler and comes out on the driver's side to the intake manifold. At first I thought it might be running down & behind the crossmember and back up to the intake.
