jays68yak
1/2 ton status
Going to use this for a project but I would rather use a manual one so that Im not wasting a good auto column. So Im selling this auto column. $100 obo. Was nice and tight in the truck before I pulled it.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
67-72 Auto non-tilt steering column
- Thread starter jays68yak
- Start date
DavidB
1/2 ton status
I think I'm going to be putting a '70 C10 on my '88 K5. Might be needing this, and some info.
How close are the body mounts? All custom fab? I might move the cab rearward a bit to clear the, ahem, 46" tires.
How close are the body mounts? All custom fab? I might move the cab rearward a bit to clear the, ahem, 46" tires.
jays68yak
1/2 ton status
Its easy and your like the second one this week to ask me about it. 
Use the 70 cab mounts, put them on the other frame, redrill the holes for the front one, rear you need to redrill the hole in the floor about an inch out. Done.
Pictures here:
http://pnkages.com/gallery/v/79Blazer/body+swap/
Use the 70 cab mounts, put them on the other frame, redrill the holes for the front one, rear you need to redrill the hole in the floor about an inch out. Done.
Pictures here:
http://pnkages.com/gallery/v/79Blazer/body+swap/
DavidB
1/2 ton status
Cool, thanks...I found your build thread.
