87 blazer, 350 4spd. UPDATE! It\'s parts Now!!!! I go back to work next tuesday. I am cutting the truck Up THIS weekend. IT MUST GO MONDAY! The tranny and hydro clutch are taken. The fuel injection is up for sale, Tectin has expressed inerest it that. Power rear window and gate still up. axels?? anybody need engine?? It's an 87 blazer. It has a 350 CI fuel injected engine that was supposed to be rebuilt. It has the 4spd tranny with a 208 t-case. Hydro clutch. 10 bolts front and rear with 3.08 gears. The front had new ball joints and axels joints last winter. The outside of the of the body doesn't look bad, but it has alot of floor rust. I redid the drivers floor and put a rocker on so i could continue to drive it. This WAS my daily driver. The whole rear floor is rotted out. I put a 2x4 steel brace across the back, mounted to frame and body. And the POWER window tailgate works. It really opens and closes!! I did lay plywood down in the back just so the snow wouldn't fly in when I plowed!! This truck WILL NOT pass a NY safety inspection. There are NO seatbelts, and no place to mount any on the passeger side(rust), The horn doesn't work, (took them for my 76) The E-brake cables are stuck. I do have a set for it. This truck runs and drives fine. just rotted all to hell!! It has 33x12.50's on some cheap steel 15x10's. I took all of the interior out and used it in my 76. I do have a carpet and a drivers seat in it from the 76. I also have the pass. seat. but never mounted it. There is NO speedo, But the sensor for it is still in it. I just took the head unit off. Some of the photo's show some 31's. I wanted to save them. I will take 500.00 for it with NO PLOW. 700.00 with the 31's(better tread than 33's) If you want it with the 31's AND the plow. I will take 1,100.00. link to pics My 76 thats for sale.