What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

At Ruffstuff we've Lowered Diff Cover Prices!

These have always had a Lifetime guarantee and we have still never had one returned dented or cracked! And that's with more than 10,000 in use :)
 
This is requoted from Pirate but if we are going to sell any of these you need to know ;) The question was.

Cyclic;35134746 said:
So, are you ever going to offer these for GM 10 bolts?
Click to expand...

I had decided to not make them several years ago when DIY 4x4 expressed an interest in making them but he never made them for what I assumed was lack of demand. He is a Blazer specific company after all.

However, 2 years ago we hired an design engineer who is very capable but I like to say somewhat excentric ;) Sam has an interesting rig, he did all the work and he uses Eaton axles. He does most of our design work and he took his own time and designed Eaton covers and convinced me we should try and sell them so we are going to make 25 and see how they sell.

So, if we are going to make Eatons I guess we might as well try the GM 10 bolt too. I will get Sam on it tomorrow but do not expect them the next day. We go through a couple of prototypes and extensive testing before we make a production run and even then the first run will be only 25 covers.

As a reminder, we need to be able to make money on them to produce them so if they do not sell well we will have to discontinue production, We do not even break even on the design work until we sell over 100...
 
Excellent, not going to be picky................ I could use a 10 bolt front cover and/or a 10 bolt 8.6 (2004 Silverado) rear cover. And thanks for listening.
Don't forget to market the rear 10 bolt 8.6 covers to the "bro-dozer" guys, you know to strengthen the axle for those monster tires and smooth parking lots they like.
 
Glad to hear you guys are going to start making one for the 10 bolt :waytogo:

Any plans to star making one for the 14bsf?
 
Gravel Maker said:
I really don't get any demand for the SF 14 but we may down the road, 1 at a time!
Click to expand...

I think you might be surprised how many you guys would sell if/when you decide to make them. There's a bunch of guys asking for them in this thread and I bet the word would spread to other forums pretty quickly too since the SF 14's are a real popular swap for modified OBS and NBS trucks. Right now the only other option that I know of is Blue Torch Fab but I'd rather buy something from a sponsor as awesome as you guys :bow:

If you guys ever want to start making them I'm about 20 minutes away from you guys and have a SF 14 sitting in my garage that you could use for measurements and whatnot to make up a prototype :whistle:
 
  • Like
Reactions: bix
Just check out our reviews, these are the best! The reviews are at the bottom of each page ;)

Dana 44 3/8" Differential Cover D44 - RuffStuff Specialties

Dana 60 / Dana 70 Differential Cover - RuffStuff Specialties

Dana 30 3/8" Differential Cover - RuffStuff Specialties

Ford 8.8" 3/8" Differential Cover - RuffStuff Specialties

14 Bolt 3/8" Differential Cover - RuffStuff Specialties

We have been making them for over 10 years now and they have been the best right from the start! Do not mess around when protecting your gears...
 
You must log in or register to reply here.

Latest Posts

Top Bottom