AZ - 78 K1500 Sub, 4l80e, S10, 35\" swampers, 8274, Ramsey 12K /forums/images/graemlins/truck.gif SOLD The 93 K2500 (126K miles) is the fancy one, power every thing, is a 4x4 with a 6.5 TD - 4L80E/NP241 3/4 ton with a 14FF in rear. Runs excellent, glows good, cruise works, AC works,4x works, (I don't think the stereo is working though) It got hit in the right/front and then spun around so there are some dents along the passenger side and the tailgate. It's a standard cab with grey interior in pretty good shape. Exterior is white with the factory black fender flares. The winshield needs replaced also. The hood is still good as well as the cab and doors (except cab has a small dent on extreme lower rear corner about the size of a grapefruit. I have a complete replacement front clip including another hood, fenders, inner and outer, radiator support, bumper. It has a fithwheel ball in bed as well as a nice reciever hitch, towing package etc. This was the last year for the mechanical fuel injection and has the highest rated injection pump of all the mechanical years. And of course it has the "stand-alone" factory 4l80E transmission controller. I bought it to strip for my 78 Suburban, but everytime I look at it I think..........Hmmmmmmm....... that's too nice of a truck to strip (I keep looking at how much these are selling for on Ebay even with a lot more miles)(3200 or make me an offer) SOLD /forums/images/graemlins/burb.gif Now ....who wants the 78 Suburban (previous owner a master auto mech) , built 396 (60K engine miles) w/bit-O-chrome and red paint, aluminum battery box with a Optima Red top, headers, dual exh and Flowmasters, th400/np205 3.73-10/12 w/Auburn LS and moser axles, dual/AC (new compressor just locked up - freeze-12), square tube luggage rack, new grey interior and headliner, cool Lokar floor shifter, tilt, factory tach, no stereo, manual windows and locks, all good glass, good body - not cut ( 35's have barely kissed the corners), 4" lift, new 35" BFG ATs with nice wheels, class 3 reciever hitch, and a not yet installed TBI system for a BBC (Oh yeah.......one small thing - Oil pressure is normal until its gets warm then lowers to about 10 with a small rod knock after it gets totally warmed up - reason for the 6.5TD project ) (3800 or make me an offer) /forums/images/graemlins/usaflag.gif Who needs a little project for this winter...............end up with a great running, rust free, AZ truck (clear title) (after a few rod bearings in the 396)??? Somebady make me an offer I can't refuse. ($$$$ /forums/images/graemlins/ears.gif ????) Additional stuff for sale: /forums/images/graemlins/usaflag.gif 94 4l80e/Np241 good runner (75K) $725 /forums/images/graemlins/usaflag.gif SOLD TCI standalone transmission controller for a 4L80E with software and cable (package with trany?) SOLD /forums/images/graemlins/usaflag.gif 4 - 35 x 15.5 x 16.5 super swamper SX's with 1 similiar size radial for spare - wore down to wear bars in center but sides look new (typical road miles)- good trail tires. $200 for 5 tires 1/4 inch tread left /forums/images/graemlins/usaflag.gif Warn 8274 with remote, cable, roller fair lead with chrome chevy classic bumper and bull bar, needs gone through, contacts cleaned and relays checked out - just clicks at you when power is applied. $475 won't seperate /forums/images/graemlins/usaflag.gif Ramsey RE 12,000 with cable and remote, roller fairlead with bumper - was on a K5, but is actually a ford bumper. Excellent condition. $650 won't seperate /forums/images/graemlins/usaflag.gifSOLD 84 M1008 (1-1/4 ton military P/U) with a 4.10 rear 14ff, a 4.56 front dana 60 is missing - 1 bearing hub , no rust but a couple of dents, no engine, will sell with or with out the core 6.2/th400/np208, bumpers, engine and cab is completely stripped, no glass - nothing in cab. Won't part with just the D60 ( I have the goverment paper to get title to this) $1500 w/o 6.2/400/208 $1800 with SOLD /forums/images/graemlins/usaflag.gif 85 S-10 blazer 2wd, blue ext, red interior, no driveline, roller new price $200 /forums/images/graemlins/usaflag.gif Grey rear folding suburban seat in great shape. $150 /forums/images/graemlins/usaflag.gif Four weld in (or bolt down) wells for a suburban floor for mounting a suburban seat in a sub that didn't have one from the factory. $100 Pics are here of most of the stuff: http://community.webshots.com/album/18947809muEkYwpiCP If you want any of this stuff PM me and tell what it's worth to you. I can deliver any of this stuff for gas up to about 10 hours from Phoenix AZ. I have a Forward Air terminal at Phoenix International.