kiken88
Newbie
How is a electric full pump with a edelbrock carb?
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
converting tbi to carborator
- Thread starter kiken88
- Start date
firefighter184
Hippie Killer
Put the TBI back on? Being in Colorado, after I went TBI, I'll NEVER drive a carbed rig again.
Recheck all your grounds and cables.
pretty sure the negative cable goes from the batt to the front of the block, and there is a little ground wire that connects the front clip to the frame rail, and then a copper strap from the firewall to the back of the head.......and i think there is one more copper strap but i forget where i goes
pretty sure the negative cable goes from the batt to the front of the block, and there is a little ground wire that connects the front clip to the frame rail, and then a copper strap from the firewall to the back of the head.......and i think there is one more copper strap but i forget where i goes
mrhoes
1/2 ton status
that is the dumbest thing I have ever heard, TBI is so much better!!!
hack500
1/2 ton status
mrhoes said:
can't agree with you there... having wheeled with both a q-jet and TBI the TBI was only slightly better at angles than the q-jet.
kiken88, when you say "getting hot" do you mean hot as in 12v+ or hot in temperature? or both?
kiken88
Newbie
hot in temp the only reson i'm doing this is i need it back on the road soon and rebuilding my 88 block and heads it had 500,000 miles before oil pump shaft retainer brokehack500 said:
