Edelbrock carb and intake information

[84CUCV]

I have them on the truck I just got. Looked all over and I did not find any model # or anything like that. They are also corroding, witch makes if even harder. How do I stop the corrosion? Where should the model # be on the carb and intake?

thanks for the help in advance.

Mike

 

[xnoahx]

check edelbrocks website and see if you can match a picture of something from the site to what you have on your truck

 

[84CUCV]

Thats one idea. There is no markings on the intake? Just found some # on the carb.

Mike

 

[84CUCV]

Anyone?

 

[dave_90_blazer]

you said there is a number on the carb?

post it

can you take a pic of the intake?

 

[xnoahx]

edelbrock manifolds usually have the model name of thier intakes cast into them. It would probably say something like performer or performer RPM. As far as the carb goes, its usually a 4 digit number like 1406 or 1910 depending on the type of carb it is.

 

[Wicked Wolf Auto]

The intake should have the name on it in raised letters. But a pic would also make it easy for us to ID

 

[84CUCV]

I will get a pic and the #


Thanks

 

[rubbinz raczn]

the part# of the intale is on the underside. but it should have a name on top as stated above. if you have a summit racing catalog or aftermarket parts one they are usually pretty good reference if the parts you are lookig at aren't real old. they have the #'s listed that match #'s on parts.

 

[84CUCV]

here is pics of the carb and intake. http://community.webshots.com/user/chevycucv

The # are 8822. Thanks for the help

mike

 

[84CUCV]

Can anyone help me out with this???

 

[Wicked Wolf Auto]

It looks alot like the street master I'm running in my blazer

http://community.webshots.com/photo/71212071/84312968vRihoi

Is your's a single plenum intake? If it is chances are its a streetmaster.

heres a better pic

http://community.webshots.com/photo/71212071/71212105vCxNxs

 

[84CUCV]

They do look alike. What is a single plenum intake? I know more about diesel then gas motors. thanks

 

[Wicked Wolf Auto]

[ QUOTE ]
They do look alike. What is a single plenum intake? I know more about diesel then gas motors. thanks

[/ QUOTE ]


A single plenum looks like this


http://edelbrock.com/automotive/autopartsphotos/manifolds/5061.jpg


dual plenum looks like this

http://edelbrock.com/automotive/autopartsphotos/manifolds/2161_badge.jpg

 

[84CUCV]

Thanks alf4444. Anybody know about the carb? Thanks

 

[rubbinz raczn]

the carb should have a # on lower left where carb mount bolt is viewed from front got that # handy? should start with a 14?? might be 2 #'s

 

[84CUCV]

I will take a look. thanks

 

[Jonny-K5]

my guess that carb is the 600cfm manual choke version.

 

[84CUCV]

It is a manual choke and the #s are 1405. So what do i have??

thanks
Mike

 

[rubbinz raczn]

jonny-k5 called it right #1405 is 600cfm manual choke non-emission carb! /forums/images/graemlins/waytogo.gif