Check the post above g’pa
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Entertain Us - 400 sbc question
- Thread starter Bent77
- Start date
If she’s 21 she’s aware of how she got here,go have fun.
No. But what she bought tonight, I should be set!!
Those ones from the gas station?
You asked about truck pills.
Auto correct working for you?
We didn't have Mexican food.
No gas..
With the possible exception of Dodges Little Red Express truck.
Then again, it was the fastest turd in a bowl full of turds...lol
We have one on our show room floor , I’d take a 400 over it even after this thread.
Checked the stats on mine some years back when I got it. Something like 8.2 compression and a useless cam.
I'm glad it's got some lower gears, I can get out if my own way. Lol
I found a chart, just dropping 64cc heads will bump compression to 9.1.
I'm glad it's got some lower gears, I can get out if my own way. Lol
I found a chart, just dropping 64cc heads will bump compression to 9.1.
I miss you two together at blazer bash 
certainly not a dull moment around you guys.
certainly not a dull moment around you guys.Yeah Dave and Steve make a cute coupleI miss you two together at blazer bash
I’m a little uncomfortable with where this is going, but what do I really have to worry about Dave probably fell asleep.
Or maybe he’s looking for an oxygen tank to share with the 400. Lol
Nope. Still early.
But Mark definitely can definitely make ya feel uneasy..
But Mark definitely can definitely make ya feel uneasy..
I’m not the one home from date night earlyNope. Still early.
But Mark definitely can definitely make ya feel uneasy..
That bingo bus at the retirement home is on a strict schedule.
I bet they don’t even walk him to the door
So this discussion started because of a truck that I bought to flip, has a crate engine of some sort under the hood, but with the heads pulled off. It came with 2 sets of Blueprint aluminum heads.
I was thinking about whether or not my son would like to have this engine for his '72 which he bought from My Dad. It has a stock 400SB out of a '72 Impala. Stock, used 400, vs a built 358. We could check the 358 out, put a roller cam in, and go.
I haven't asked him if he would prefer to keep the 400 that my Dad and I installed into the '72 back in 1986.
But at the rate that the rebuild of the truck is going, there are years to discuss this.
I was thinking about whether or not my son would like to have this engine for his '72 which he bought from My Dad. It has a stock 400SB out of a '72 Impala. Stock, used 400, vs a built 358. We could check the 358 out, put a roller cam in, and go.
I haven't asked him if he would prefer to keep the 400 that my Dad and I installed into the '72 back in 1986.
But at the rate that the rebuild of the truck is going, there are years to discuss this.
But neither of those motors are stock , so why discussion on stock output?
