mo
1/2 ton status
Need studs an nuts now, let me know if you have some, even if its only a few that you want to part with thx, Mo
Last edited:
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Hummer 8 Bolt studs and nuts
- Thread starter mo
- Start date
mo
1/2 ton status
still lookin
BKinzey
1/2 ton status
Check with this guy. Seems to be a good guy, might have some or be able to get some for you
He's in Hesperia, CA.
http://motors.search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmilitarysurpluspartsQQssPageNameZSTRKQ3aMEFSQ3aMESOI
He's in Hesperia, CA.http://motors.search.ebay.com/_W0QQfgtpZ1QQfrppZ25QQsassZmilitarysurpluspartsQQssPageNameZSTRKQ3aMEFSQ3aMESOI
mo
1/2 ton status
will do, thanks.
mo
1/2 ton status
thanks, he had the outer rings. could still use some studs and nuts though for less than $96
thx
thx
mo
1/2 ton status
bump
Why not just go to a fastener store & buy grade 8 fine thread bolts, nuts & washers. Or you could macth up a wheel stud at the parts store. I bought mine from Marion Hummer in ATL. I bought just the studs. I bought the nuts local, there is nothing special about them. The studs I got from Marion hummer I had to grind the head off on one side to make them fit my wheel.
Marion Hummer 770-953-1800
Marion Hummer 770-953-1800
