ive been lookin at hydro assist kits, and im planing on buyin a kit. i just wantt to make sure hydro assist will turn my dana 60 with a spool on rocks? im tired of getin out and unlocking my hubs just to make a turn.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
hydro assist on spooled d60
- Thread starter down4thakrown
- Start date
mtnman210
1/2 ton status
I'm spooled in my 60 with crossover and hydro assist and 40in tires, I don't notice any difference in turning ability from when the locker was in there....except for turning radius.
so it was a big help? and makes it easier to turn? im not sure what you mean
. i never had a locker in the front. i figure a locker is jus as hard to turn under accleration/power.
http://coloradok5.com/forums/showthread.php?t=267324&highlight=hydro+assist
good info here. and kit on the cheep.
and vendor here http://diy4x.com/cart/index.php?route=product/product&path=17&product_id=146
then drill and tap top aluminum cap for other port.
get a ram kit from someplace and tractor supply store hoses and basicly done.
good info here. and kit on the cheep.
and vendor here http://diy4x.com/cart/index.php?route=product/product&path=17&product_id=146
then drill and tap top aluminum cap for other port.
get a ram kit from someplace and tractor supply store hoses and basicly done.
