Looking for a full floating 6 lug for my sand drag K5. 6 lug or 8 lug dont matter.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
I NEED 1 14 Bolt FF Axle
- Thread starter SIK5
- Start date
I don't think they ever made a 6 lug full floater, but I have been known to be wrong sometimes.
They did make a 6 lug semi-floater.
I have also heard there is a converstion kit to make a 8 lug ff into a 6 lug ff.
They did make a 6 lug semi-floater.
I have also heard there is a converstion kit to make a 8 lug ff into a 6 lug ff.
Companies make 6 lug hubs for 14bff axles
About $500.
They all came 8 lug factory in a full floating axle.
About $500.
They all came 8 lug factory in a full floating axle.
Hey D Rat PM with a price please and pics if it's not a PIA. Thanks!
Jimbo*
1/2 ton status
Where in West Texas are you?
I have a couple of 14FF's, 3.73 open, 4.10 open, and 4.56 detroit, in Roswell, NM
I have a couple of 14FF's, 3.73 open, 4.10 open, and 4.56 detroit, in Roswell, NM
First off, you need to determine what you want.
Second, there was NEVER a 6 lug 14ff from the factory. There is however a 6 lug 14sf axle which is alot stronger than a D44 or 10 bolt but still weaker than the 14ff axle.
I have a 14FF with 3.73 gears, complete hub to hub, and will toss in new rear disc brackets all for $250.
I'm in central Kansas.
I'm in central Kansas.
Thats a hell of a deal!! I'm actually just gonna stick with my 12bolt rear end...slap a Detroit Truetrac in with 4.11's...add some chrome-molly 30 splines and hope for the best.
Thanks guys for the good information.
if doing gears I would also toss in a solid pinion spacer over the oem crush sleave .
and lots of members here like there truetrac unit .
and lots of members here like there truetrac unit .
