What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

just double checking my moron status....

bump for clarity:D :dunno: I don't know if itll be ok
 
EagleMark can clarify, but I see the TPI pumps recommended as replacements for the TBI's to ensure that fuel pressure can be maintained, so I would expect the regulator will bypass plenty to not have to worry about it.

The return line on a 305 or 350 TPI motor was the same size, same regulator everything, and the truck return line AFAIK is the same diameter as the TPI ones. Therefore, I don't see where there would be an issue with volume.
 
that's what got me is my return line is smaller than the feed
 
I guess its been done before...... but I just don't wanna chance it if im gonna burn the pump up in another year .:haha:
 
I probably worded that poorly...I meant that the tubing between feed and return IS different size on TPI (what is it, 3/8 and 5/16?) , I was making reference to the fact that both the TBI and TPI setups use the same size feed/return, even though the volume is obviously far less on TBI.

Now you've got me curious to see what volume you can push through that size pipe.
 
You must log in or register to reply here.

Latest Posts

Top Bottom