Made video clips of grooving the 42\'s and weld on frame repair today.... My buddy and I did the weld on frame repair thing to my K5 and grooved my 42's today. We made clips of both. We almost died while doing the tires....My "Do not do this at home" commentary at the beginning of the grooving clip, is no joke. When I lit the torch, I just turned on the propane valve and used the propane heater to light it. (Don't try that- stoooopid) What I didn't know was that it blew out the flame at the heating element and left a small flame burning in the the tubes behind the heating element, by the time I was done preheating the tire, it was red hot back there.. Lesson learned. We got lucky that it didn't blow up. Watch the video and you'll figure it out. Since it was super cold outside and the tires were really hard, we used the propane blow torch to heat them up so they'd be easier to groove. Both clips are pretty big downloads- the frame repair one is 80+ MB and the tire grooving one is 40+ mb. Weld on frame repair. Grooving the 42's.