Misc NP 205 parts

[8_YOUR_H2]

I have a 205 sitting in my garage with the figure 8 case. I has no trans adapter or rear output. It has the 30 spline front flange. Have the case and internal gears. Let me know what you need. Located 50125. Would sell it all for $65 plus shipping but its heavy.

email brent795 at mchsi.com

 

[cegusman]

Do you have the rear fixed yoke assembly?

 

[thatK30guy]

Does it have the input gear? If so, how many spline? And what year is this case?

 

[sweetk30]

Do you have the rear fixed yoke assembly?

he said no rear output on it.

 

[8_YOUR_H2]

It has the input gear which is 27 spline. It was mated to a TH350. I do not have the adapter sleeve, trans adapter or rear output. That includes but is not limited to the rear fixed yoke assembly.

 

[thatK30guy]

It has the input gear which is 27 spline. It was mated to a TH350. I do not have the adapter sleeve, trans adapter or rear output. That includes but is not limited to the rear fixed yoke assembly.

What do you want for this 27 spline shaft?

 

[8_YOUR_H2]

Pending sale on the 27 spline input.

 

[thatK30guy]

Payment made.

 

[1973K5Blazer]

Do you have the bolt that hoolds the shift rail spring and ball inplace on the top of the case. Can't recall actual name for it but it is a short and hollow? How much shipped to 92595?

 

[tennyohpc]

shoot me a pm with what you want for the front output shaft and flange.

 

[8_YOUR_H2]

Yes, I do have the bolts, springs and check balls. One is a 4wd sensor but it works all the same. $20 shipped?

I would take $50 for the front output and flange. Shipping would be about $10.

27 spline input gear sold and shipped.

 

[1973K5Blazer]

Do you still have these parts? Finally getting back to completing this project!


quote=8_YOUR_H2;2334540]Yes, I do have the bolts, springs and check balls. One is a 4wd sensor but it works all the same. $20 shipped?

I would take $50 for the front output and flange. Shipping would be about $10.

27 spline input gear sold and shipped.[/quote]