If you were here, I'd weld it for you..
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Need help.....rear shock mounts
- Thread starter Green Monster
- Start date
Green Monster
1/2 ton status
That's the problem! I don't know how to weld, and every time I call a welder out to the house it costs a minimum $150. Well if you're in SoCal, come on by.
Pay for my gas and lunch, lets do this!
Let me look in my bucket of tricks, I might have a thick washer with hole in it already. What is the hole diameter of the ORD brace?Oh wait, better still, what is the diameter of that shock mount, where the bushing sits?
I don't see why we can't open the hole up some to accept a bolt, with a shank the proper size of the shock bushing. Put a stover nut on the back side and roll.
Or swing by if the thing runs. PM me
Let me look in my bucket of tricks, I might have a thick washer with hole in it already. What is the hole diameter of the ORD brace?Oh wait, better still, what is the diameter of that shock mount, where the bushing sits?
I don't see why we can't open the hole up some to accept a bolt, with a shank the proper size of the shock bushing. Put a stover nut on the back side and roll.
Or swing by if the thing runs. PM me
