How's the hood latch striker plate and the spring on the latch?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Sold Parting 1975 GMC K25
- Thread starter kennyw
- Start date
And maybe the headlight buckets and hardware?
I'll take a look at the latch. The headlight buckets have been sold though.
Been able to get to the brake pedal spring yet?
Not yet, trying to get my schedule lined up with a friend's to finish his trailer project to make space to pull this back in the shop.
So what’s going on? You built a new shop,your buying cheep squares, and selling parts to guys on Ck5!?
Cool with me!
Cool with me!
Everything appears to be in working order. The hood was not functional when I started parting the truck out due to the driver's side hinge rusting off of the inside of the fender so I never had a chance to see how well it latched though.
And I found another C10 to look at this weekend...So what’s going on? You built a new shop,your buying cheep squares, and selling parts to guys on Ck5!?
Cool with me!
How much are you looking to get for just the striker plate?
$10 plus shipping. It should fit in a medium flat rate for $15
I'll pm you
Made a little progress this weekend. Had a guy take the roof section for patch panels. Removed the front sheetmetal for better access. Now on to pulling drivetrain.
Found a bonus under the seat. This probably explains the rust.
Also, I am still not sure what these are, one on each side if the axle but they only engage if the axle unloads. Could be anti-sway for hauling a camper in lieu of a sway bar?
Also, I am still not sure what these are, one on each side if the axle but they only engage if the axle unloads. Could be anti-sway for hauling a camper in lieu of a sway bar?
I have a couple different AC setups but none came from trucks I could test. I will double check what I have today.
Thank you, Kenny! FYI - I'm not in a rush!
Most of this truck is gone now. I still have the winch and winch bumper, TH350/NP203, and lap belts available.
Sorry, I haven't found anything that looked good.
