question about lifted Blazer

[83ChevyK5Blazer]

Did they add welded on plates to the frame at all the body mount locations or just the rear blocks?

 

[CharlieC]

I have 35’s with Bushwacker cutouts and a 4” lift up front. I’d recommend getting this https://diy4x.com/product.php?productid=17722&cat=250&bestseller=Y to put up front, not for the 1” lift but to move the axle forward an inch. Just did it on mine and it got rid of tire rub on the inside lip at full turn. You may have to add one in the back to keep overall lift the same.

Charlie

 

[70jimmy]

Keep an eye on the radiator also those are sometimes altered for the body lift. Looks like they didn't lift the rear bumper up but you may need to re-align the bumpers to look decent. Also heater hoses, obviously anything that connects to the body on one end and engine/frame on the other.

 

[Venanzi85]

does anyone know whats a good site or company i can find a complete cab/mount and all the necessary hardware so i can take the lift off, i see LMC has the complete kit but its always been on backorder, but they do have the 78-80 kit in stock wondering if i can use that one?

 

[cheavyk10]

K5 Blazer and Jimmy Body Mount Kits

Replacement polyurethane body mount kits, new, durable and they help with body flex.

www.offroaddesign.com

 

[Venanzi85]

K5 Blazer and Jimmy Body Mount Kits

Replacement polyurethane body mount kits, new, durable and they help with body flex.

www.offroaddesign.com

thanks I was looking at that one and then I would just need to buy the body bolt kit they sell as well, just trying to get everything i need once

 

[cheavyk10]

Don't be afraid to shoot them a call, ORD will help you get set up with everything you need.

 

[Venanzi85]

Don't be afraid to shoot them a call, ORD will help you get set up with everything you need.

ordered thank you.