Mudstud
1/2 ton status
I got a set of rims. All I know is they came off of a 1995 454 equiped sub. They are 8 on 6.5 and have about 4.25" BS but I'm not sure of the height x width.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
Rim size on a 95 burb?
- Thread starter Mudstud
- Start date
resurrected_jimmy
1/2 ton status
16" x 6" I believe
dfl701
1/2 ton status
yea maybe 16x7. they arent very wide
I actually think the 8 lugs were narrower than 16x7 But in that ballpark.
Mudstud
1/2 ton status
Sounds like all agree they are 16" wheels. Thanks for the replys.
Most rims, especially factory versions, had the size stamped on them somewhere. Often it is on the inside (i.e. can't see it if tires are mounted but doesn't sound the case in this situation).
Factory rims of this era are generally 16x6.5. However, about 45 seconds with a tape measure will tell you for sure.
Factory rims of this era are generally 16x6.5. However, about 45 seconds with a tape measure will tell you for sure.
Mudstud
1/2 ton status
I'll look for the stamped size. Thanks. Measuring rims isn't as easy as it sounds. Especially when there can be a size difference of .5" (16 or 16.5).
Pretty sure you won't find 16.5"s from the factory on anything since the 70's at the latest. ("Anything" being defined as passenger cars and light trucks.)
Though determining the width with a tape measure always drives me nuts.
-- A
16x6.5".
