CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

TBI 454 with computer and harness

afroman006

1/2 ton status
Joined
Aug 21, 2002
Posts
2,876
Reaction score
0
Location
College Station & Kingsville, Texas
This engine came out of a 91 Chevy C/K series 1 ton dually. The odometer on the truck is showing 96,000 miles on it. The engine is in good shape overall, the truck was parted out because the tranny (4L80E) was blown and wasn't worth fixing. I started it before I removed it and it ran great. The computer and harness are included and are for the TBI 454/ 4L80E combo. Every single accesory, bracket and bolt are included in the sale. I had started tearing this engine down because I was going to freshen it up a little bit and put it in my burban, but since I'm going to sell the burban and the new truck I got already has a 454 in it, I do not need this engine. The only item of interest on it is a "remanufactured" badge on the side of the block. The previous owner did not say anything about it having a reman engine and the 6 digit odometer only has 96k on it, so I'm not sure what the deal is. Make no mistake though, this engine is in great shape. It is located in Kingsville, TX. Local pickup is prefered but I can deliver between there and College Station for a small fee. There is no tranny available. If you have any questions, port up here. Here's the pics.

front.jpg

front2.jpg

front3.jpg

number.jpg

sideshot.jpg
 
Look at the reman tag and see much an over bore there and much the crank has been cut on the rods and mains. I may need this for my sub. Thanks

bigred81
 
Hey sorry it took so long, but my puter is still fubar'd. I started it in safe mode just to look at the rebuilt patch and this is what it says,

"Remanufactured Engine"
Production no. 789585
Remanufacturer Code 1
 
Dang It!

David quit digging up old threads, my heart was pounding on this one!

lol
 
Top Bottom