JunkYardCrawler
1/2 ton status
i was woundering if the TCI one in Summit would work to replace one on an 86 3/4 tone. thanx
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
TH400 to a NP208
- Thread starter JunkYardCrawler
- Start date
JunkYardCrawler
1/2 ton status
ttt
K10ANDYKHAMNIC
1/2 ton status
i dont see y not ....
dents ....
O R D's axles
NO BREAKAGE
dents ....
O R D's axles
NO BREAKAGE
JunkYardCrawler
1/2 ton status
summit say that the TH350 would go up but i think its the TH400 in it now. i not much of an auto tranny guy. so i not totaly sure.
84_Chevy_K10
Banned
If the pan looks like a square with a corner cut off, it's a TH 350.
If it looks like the state (Republic????) of Texas, it's a TH 400.
Tim
'84 Chevy K10, lifted, loud, fast, and 3/4 ton axles
If it looks like the state (Republic????) of Texas, it's a TH 400.
Tim
'84 Chevy K10, lifted, loud, fast, and 3/4 ton axles
95 Silverado
1/2 ton status
4WD application transmissions have a different length output shaft, it isn't as long as the car trannies, be sure you get the correct one for your truck. also a 350 turbo has a 27 spline output, the 400 turbo has a 32, you will need the correct one to fit your transfer case.
