Only with lotsa grinding you can.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
what's under your wheeler?
- Thread starter colbystephens
- Start date
fishinnutt
1/2 ton status
D60 drivers side drop front and a D70u out back.
Randy92782
1 ton status
I don't run anything except my stock axles in my 94 chevy. Only thing running and i run 35" MTZ's now. waiting for a pop any day 
I vote naked cause everything that's solid axle is broke in one way or another
BTW that Army truck contraption is what i want to freaking build
I vote naked cause everything that's solid axle is broke in one way or another
BTW that Army truck contraption is what i want to freaking build
Last edited:
FRIZZLEFRY
1/2 ton status
It happened over time,not all in one shot.It used to be my DD so I built it as I got money.
"Too much " is a relative tern.To me it was money well spent.I had the money and I still got to wheel it between mods.I have never missed a trip or a complete season of wheelin because my junk was down waiting for something.I wasnt gonna sit around and not wheel while saving up $3k to build a 60
And for those running stock 10 bolt/Dana 44 shafts that want more from their front shafts but dont want to drop coin on chromo stuff
Grind or machine your stock shafts for full circle snap rings and run Spicer 5-760x joints.Most stock shaft failures I have seen in the joint area are due to the half clips comming out,the cap falling out,and in turn pulling the ears outa the shaft....
I've had good luck with that setup for a few years on a locked 28-spline 10b.
Fabrimacator21
1/2 ton status
2 questions.... what size tire? And how come it says 30 spline under you name?
35s. My current setup is 30-spline axles.
Last edited:
MTMike
1/2 ton status
^ This, dually style with H1's
I need to vote twice, then I could vote naked and one ton
the wheeler pickup is one tonned, 60 and a 14b ff both with detroits
the new blazer project will be a 14b sf rear and a 10 bolt front with the later shafts
the wheeler pickup is one tonned, 60 and a 14b ff both with detroits
the new blazer project will be a 14b sf rear and a 10 bolt front with the later shafts
Stomis
Professional Amateur
I would never. I have a friend in town that did this and cracked his caliper casting in half under hard braking
cheyennek20
1/2 ton status
D44 with Superior 30 splines inner/outer
Stock 14 FF
4.10 cogs in both ends
Stock 14 FF
4.10 cogs in both ends
Randy92782
1 ton status
you really have to take that much off??I would never. I have a friend in town that did this and cracked his caliper casting in half under hard braking
BRIAN THOMAS
Registered Member
Just step up.
Its cheaper in the long run. I did the 44 thing for ever cause my x was a money whore and kept me broke for a long time. Once that pile of poo left i realized i could afford to build a 60.
I joined the 60 club in 05 and have not feard anything since. The price was a shock. I have about 5000 in mine but it was so worth it. That was doing all the work myself.
Its cheaper in the long run. I did the 44 thing for ever cause my x was a money whore and kept me broke for a long time. Once that pile of poo left i realized i could afford to build a 60.
I joined the 60 club in 05 and have not feard anything since. The price was a shock. I have about 5000 in mine but it was so worth it. That was doing all the work myself.
Last edited:
