CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

1 and 2 gens: driveshaft, 4 core, ram horns, 4 speed column, windshield, door,

R77K10

Banned
Joined
Mar 15, 2006
Posts
564
Reaction score
0
Location
Lincoln IL
alot of stuff that i cant remember right now but heres a few things to start with, prices are just whatever came to mind for now, lets talk


= 77-87 front silverado power door parts, everything intact and good, factory original, tan panels, also pair of gray ones, nice, offer me with some mail cost


= early second gen pickups dual tanks related stuff, valve assembly, filler necks and tubes for bedsides,

= 73-87 in general pickups fuel system parts, hangers, straps, brackets, tanks, carb senders, filler necks and hoses you name it i have it,

= 1980 fuel filler door assembly nice spring conditon and everything, $15

=67-72 windshield real nice shape clean 40

=67-72 4 speed MANUAL column nice complete 40 -NO IT IS NOT A COLUMN SHIFT FOLKS= IT IS A SMOOTH COLUMN NO SHIFTER! ALL 67-72 GM TRUCK 4 SPEED MODELS WERE TOP LOADER TRANNY EQUIPPED! IE: CH465, SM420, NP435, ETC.....

=1968 465 tranny- 2wd- whole or parts,-all gears work great- i drive it so i know for fact- whats fair?

=front driveshaft for second gen with th350, 203, dana 44, good and complete nothing wrong with it at all! not sure on price


=nice original crack-free rams horns exhaust manifolds

=the driver side is only for 65-68 with alternator driver side

=the pass side works all years through 72
-i have a couple other rams horns around here somewhere too in fine shape no problems at all, not sure on price?


=67-72 manual trans clutch pedals assembly complete 30

=stock copper brass 4 core radiator very clean nice shape for 73-80 trucks v-8 gas only and auto trans, also shroud but a piece is out of the lower but its still a solid shroud not sure on price

=stock original 67 small back cab glass 20

= 67-72 radio delete plate, nice, red, 15

= 68 only instrument panel cluster and bezel for with the Z53 guages no tach or air or vacuum, it has normal z53 batt oil temp, good shape complete all works fine, 25

= 68 red glovebox lid real nice shape with button and hinge and all, 20

= first gen pickup gas tank sender unit assembly, good, 30

=1969 250ci exhaust manifold, real nice, not integrated and not EGR, this is the good one, 45

= 86 silverado power door panels pair real nice clean shape, cloth and vinyl and pockets lower front, 25

=81 pass side front manually regulated door, replacement one, a few years old but is clean, has the mirror holes for the common 80s style silverado "dumbo" chrome stainless mirrors= not the three arm ones, fair price ??


=1985 208 case 27 spline from a k20, complete and good, also have crossmember and well whole truck, whats fair for it ?

=1985 tilt cruise auto column, good and all there, whats fair ? 84-87 are the years of these and 88-91 old body style too


TONS of other parts, related to this and others not

just never know, ask me


[email protected] email or messenger anytime to talk

randy
 
Last edited:
does the 67-72 4 speed column floor or colum shift? ifit is still for grabs and floor shift I'll take it.
 
RGV72BLAZER said:
have a passenger 67-72 fender? inner fenders also?

hi nope im parting the 68 and it is a C-60

so i dont have any 67-72 5-30 series body parts- or not very many anyways- but the cab is virtually the same except for angled front bottom of firewall/floorpan and door corners


thanks
 
steve_kibbe said:
Does this have the shift lever on it?


steven, howdy, no- 4 speed was on the floor in all the gm trucks

you are thinking of 3 speed auto and manual columns.,..


thanks
 
55Willy said:
does the 67-72 4 speed column floor or colum shift? ifit is still for grabs and floor shift I'll take it.


hey there, all 67-72 truck 4 speed trannies were top loaders..... everyone knows this...

see my signature its a 4 speed, there was only one column made/used regardless if it was a K-5, or a C-60= with 4 speed trans*



if youre truly interested then let me know



thanks
 
i could pipc if i had a digicam but i still freaking dont after three years now, cannot find one and no one will trade me one for anything i ever offer up

so i dunno... digicams are impossible to get hands on

i give up on that


thanks
 
Interested in the clutch pedal assembly. What all comes with it, are you willing to ship, etc
 

Latest Posts

Top Bottom