10 bolt hub/spindle axle bearing source?

[eodcoduto]

My front end is getting loud so I want to pull the hubs and replace the bearings. What do you guy recommend for a stock 1985 K20 Suburban with LT235/85/16's? This is a street driver and occasional light trail vehicle and I am running M1009 CUCV hubs right now and those might need replaced too.

 

[obijuank5]

Spindles and hubs are available new aftermarket at oriellys. I would only use timken wheel bearings. We have a local distributor that gets close to rock auto prices.

 

[89 jimmy]

X2 on the Timken bearings. Wonder how good the standard Timken bearing grease is? For a complete hub, rotor assembly how bout these? Bearing races already installed. Makes things real easy. Not sure if they fit your truck, have a look
https://www.summitracing.com/parts/agb-56299r

 

[sweetk30]

rock auto for the timken bearing races / bearings / seals . then a good grease brand .

 

[89 jimmy]

X2 on the Timken bearings. Wonder how good the standard Timken bearing grease is? For a complete hub, rotor assembly how bout these? Bearing races already installed. Makes things real easy. Not sure if they fit your truck, have a look
https://www.summitracing.com/parts/agb-56299r

You would need the bearings and the seals

 

[eodcoduto]

Yea I was looking for a kit, rockauto only lists one bearing that I can see. I also don't want Chinese rotors or bearings.

 

[sweetk30]

your going to get off shore rotors and drums anymore unless new old stock is found sorry . . .

 

[sweetk30]

Yea I was looking for a kit, rockauto only lists one bearing that I can see. I also don't want Chinese rotors or bearings.

https://www.rockauto.com/en/catalog...+v8,2799,brake+&+wheel+hub,wheel+bearing,1672

 

[sweetk30]

X2 on the Timken bearings. Wonder how good the standard Timken bearing grease is? For a complete hub, rotor assembly how bout these? Bearing races already installed. Makes things real easy. Not sure if they fit your truck, have a look
https://www.summitracing.com/parts/agb-56299r

thats half ton 6 lug . he has a 3/4 ton 8 lug .

 

[89 jimmy]

thats half ton 6 lug . he has a 3/4 ton 8 lug .

Thx for catching that. Those would be an easy, complete option for the 1/2 ton 6-lug trucks

 

[eodcoduto]

Got it all ordered, thanks for the help on this Jv question and now I need to find a decent spindle nut socket.