(10b/d44) 8 lug hubs/lockouts in sacramento....

[TheBeast_88K5]

I have some 8-lug hubs I was gonna use, but never did.
I also have auto-locking hubs that go with it.

The hubs are in good shape, light surface rust. (they came from So-Cal.)
*The hub bearings are trashed.
They're 'small diameter', and I smashed them onto a 'big' spindle.

The auto-lockouts were brand new 5yr's ago.
They were installed in an axle, and never used,
but did sit in the axle, outside, for 5 yr's....
(They have little rust spots here and there.)

They're free in Sacramento, or the surrounding area.

I dont wanna ship, cuz it's not worth it.

 

[imiceman44]

I have some 8-lug hubs I was gonna use, but never did.
I also have auto-locking hubs that go with it.

The hubs are in good shape, light surface rust. (they came from So-Cal.)
*The hub bearings are trashed.
They're 'small diameter', and I smashed them onto a 'big' spindle.

The auto-lockouts were brand new 5yr's ago.
They were installed in an axle, and never used,
but did sit in the axle, outside, for 5 yr's....
(They have little rust spots here and there.)

They're free in Sacramento, or the surrounding area.

I dont wanna ship, cuz it's not worth it.

So They are small bearing hubs but 8 lug?
That would mean they are external lock style right?
Is the hub still in good shape after destroying the bearings?

 

[TheBeast_88K5]

So They are small bearing hubs but 8 lug?
That would mean they are external lock style right?
Is the hub still in good shape after destroying the bearings?

I dont know....

I just know that the bearings I bought,
weren't for the spindle I tried to put them on.

I figured that out the hard way.

I got the hubs off eBay, and I don't know what they came off of.
(Other than a d44.)

 

[TheBeast_88K5]

To clarify,

I NEVER drove on them.
When I went to install them, they wouldn't slide all the way onto the spindle.
After that, I had to whack the hub w/ a rubber mallet to get the bearing to let go.

Hub's are fine, bearings are garbage.

 

[thatK30guy]

Pics of the parts for sale will help a lot to identify the correct pieces if someone is looking for yours.

 

[imiceman44]

Are you close to Chris?
If so I am going to pick up some parts and I could swing by and check them out, if they fit my need I would take them.

To clarify,

I NEVER drove on them.
When I went to install them, they wouldn't slide all the way onto the spindle.
After that, I had to whack the hub w/ a rubber mallet to get the bearing to let go.

Hub's are fine, bearings are garbage.

 

[TheBeast_88K5]

Are you close to Chris?
If so I am going to pick up some parts and I could swing by and check them out, if they fit my need I would take them.

I'm about 8 miles down [50], from Chris.

I could meet you out by his pad, tho.

 

[imiceman44]

Cool.
I will let you know when that will be.

I'm about 8 miles down [50], from Chris.

I could meet you out by his pad, tho.