big4x4ride
1/2 ton status
Anyone know what companys sell a 1350 Yoke for a 12 bolt?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
12 bolt 1350 yoke
- Thread starter big4x4ride
- Start date
big4x4ride
1/2 ton status
Ttt
big83chevy4x4
3/4 ton status
i know the 10 bolt and 14 bolt sf share the same spline and seal diameter, and iim sure the 12 bolt is the same. so you should be able to get one from a junkyard off a 3/4 ton truck
pauly383
Daddy383
Look for 12 bolt trucks with clutch pedals still in them in junkyards , that yoke should fit the bill for you 
Hossbaby50
3/4 ton status
Most 12 bolts with manuals do not have 1350 yokes. Only the manuals from 1/2's with 465/208 setups will have 1350 yokes at the pinion. The 10 spline (203's & 205's) 465's will most likely have 1310 yokes at the pinion.
Randy's R&P may have 1350 yokes for sale for a 12 bolt. If not NWF may know where to get them or HAD. Call some local shops too. They are out there in the aftermarket.
Harley
Randy's R&P may have 1350 yokes for sale for a 12 bolt. If not NWF may know where to get them or HAD. Call some local shops too. They are out there in the aftermarket.
Harley
pauly383
Daddy383
They are readily available in the after market like you said .
They cost though .
129.99 at Currie
150.00 at Natl d-train
95.71 Chassis engineering
Even though car and truck 12 bolts are different , the splines on the pinion , and definitely the oil seal for a 1350 , should be the same , and jegs has 1350 yokes for 85 bucks NEW .
They cost though .
129.99 at Currie
150.00 at Natl d-train
95.71 Chassis engineering
Even though car and truck 12 bolts are different , the splines on the pinion , and definitely the oil seal for a 1350 , should be the same , and jegs has 1350 yokes for 85 bucks NEW .
