That looks exactly like the napa one that everyone is selling that I originally posted.
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
12 volt air compressors
- Thread starter Truckman4life
- Start date
So the one from Amazon is not the same on that I bought. It is the one that isn't controlled by a computer of sorts. Mine you set the PSI and walk away.
It only took about 10 minutes to fill my tires from 12psi to 30psi. So a 30 minute run time is not an issue.
It only took about 10 minutes to fill my tires from 12psi to 30psi. So a 30 minute run time is not an issue.
Thor's Lightning Portable TotalControl 12v True Dual Air Compressor 10.6 CFM - Thor's Lightning Adventure Systems
Shop Thor's Lightning Portable TotalControl 12v True Dual Air Compressor 10.6 CFM. See the rest of our 12v portable air compressors & Air Systems.
thorslightningairsystems.com
I've used the Extreme air unit before. Borrowed it from Larry for a couple of trips. His came in it's own toolbox. It's massive. But it fills tires in no time. Truly a beast. The downside is the size. The toolbox takes up a ton of space.
Used it in Moab this last weekend. The hardest part about it was setting it up, it wasn't hard to set up just took a minute cuz you have to you know take the valve caps off, once it was set up it worked great no issues.
Steven Watson and I talked about maybe running like shorter hoses to a central system with connections near each wheel with the compressor plugged into a main line or something like that.
Would not be hard to make the system the only benefit would be not having the coil up the longer hoses.
Steven Watson and I talked about maybe running like shorter hoses to a central system with connections near each wheel with the compressor plugged into a main line or something like that.
Would not be hard to make the system the only benefit would be not having the coil up the longer hoses.
I built a 4-way setup, with a stop at Harbor Freight and some parts on-hand. Basically it's a manifold that has a standard air-tool fitting and a ball valve as an inlet, a pressure gauge on top and then 4 yellow plastic hoses going out. At the end of each hose is a valve stem clip, kind of like this:
These theoretically don't leak when they aren't attached to anything, so you can use the system as a 2-way or whatever. This also works for airing down and puts all 4 tires at the same pressure. I don't recommend those clips, as they like to pop off. I'd like to try something more like this:
To preserve the normal "just air up one tire" hose from the compressor, I soldered a brass valve stem fitting to some brass fitting with NPT and attached a standard air tool quick disconnect. That's what connects to my manifold described above (or whatever else).
These theoretically don't leak when they aren't attached to anything, so you can use the system as a 2-way or whatever. This also works for airing down and puts all 4 tires at the same pressure. I don't recommend those clips, as they like to pop off. I'd like to try something more like this:
To preserve the normal "just air up one tire" hose from the compressor, I soldered a brass valve stem fitting to some brass fitting with NPT and attached a standard air tool quick disconnect. That's what connects to my manifold described above (or whatever else).
Latest Posts
-
-
-
Crews and worthy rigs Around the country- Latest: fourwheelerjeff
-
