What's new
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.

1330 CV Rear Shaft for a Blazer with a Doubler

M

Mudzer

1/2 ton status
Author
Joined
Feb 17, 2000
Posts
3,636
Reaction score
2
Location
Missouri
I was cleaning out the shop and found a D-shaft I have that could be useful for somebody. This is a JE Reel 1330 CV shaft (and 32 spline yoke for the rear output on an NP205) which fits a 2nd Gen ORD or WMS doubler setup (3" width) with a 1350 slip yoke on the axle end. IIRC This would fit a Blazer (stock wheelbase and approx. 6" lift) with a doubler and a 14bolt.

I have the shaft and 1330 CV yoke $40 by itself (32 spline) as well as the 4 yoke bolts for the 1330 CV end. This shaft is in like new condition with VERY few miles of any kind on it (no mud). I installed it and had about 3 runs with NO highway miles on it before I went to my S-TON setup that had a longer wheelbase. It is guaranteed to be in great shape!

I will get measurements on the full slip/closed dimensions as needed. EDIT: 32" collapsed and 36" extended. This has the desirable Spicer 1" longer than stock male slip/2" longer 1350 yoke installed. It also has the good seal to keep dirt out of the slip spines.

Could also fit the front output if you have a Ford 32 spline output and modified it to fit.

$125 Firm

Also have a stock GM 30 spline D60 outer that is in good shape for a spare. $20 plus shipping. SOLD!

Email me at [email protected] for info and pics. Buyer responsible for shipping costs from Central Missouri.
 
Last edited:
ill take the d60 outer shaft, shipping to 22039.

can you get pics of the driveshaft? might be interested in that as well
 
UPS Ground for the outer is $14.00 for 10 lbs.

UPS Ground for the D-shaft and yoke by itself is $18.00 for 22 lbs.

UPS Ground for the D-shaft and the outer is $25.00 for 32 lbs.

I am emailing pics, but they are over 2 meg by themselves. I wanted to give you some detail. Let me know if you want them bro.
 
Mudzer said:
Did you get my email? BTT.
Click to expand...

hey ya i got the email, the parts look great. however im going to have to pass on both for now, the guy i was hoping could do my machine work cant do it anymore:doah:

the parts are nice and for a great price!
 
1979jimmy350 said:
what is the bolt pattern on the 32 spline yoke? Could you post a picture of it?
Click to expand...

I can measure it sometime this weekend. It fits only a 1330 CV though I think. I guess you could put u-bolts into it and make it work with a 1330 u-joint. I will get pics Saturday evening.
 
Sale pending on the D60 outer. D-shaft is still for sale. If someone buys it for the $125 plus shipping cost, I will throw in a brand new 1350 D60 yoke.
 
You must log in or register to reply here.

Latest Posts

Top Bottom