1410 and flange questions

[obijuan]

do the rockwell 1410 yokes like this one for $15:

have the same bolt circle as say the front flange on my 205? i understand there is a raised locating ring on the flange for the chevy cv shaft and i would turn that down.

i have a 1410 yoke for my 60 to just help out with the angles up front. i would like to just keep this on the cheep with a used local drive shaft. just kinda exploring my options. thanks yall!
http://i9.ebayimg.com/06/i/000/aa/ac/aaab_1.JPG

 

[tacoma]

Just went out and eyeballed mine and I would say... no. I can take actual measurements tomorrow if you'd like.

 

[mikey_d05]

No, they don't, and nobody makes a 205 flange that will fit the rockwell 1410 flange. Your best bet is to just buy the 1410 yokes. Trust me, I wish there were another way, I already looked into this pretty heavily.

 

[obijuan]

can i potentially redrill the flange?

 

[mikey_d05]

Not to the best of my knowledge, I believe it's too small.

Neapco has catalogs on their website. Their large 1410 flange is the one you find on the Rockwell. You can check the bolt circle size there. If you can't find it, let me know and I'll look it up.

 

[1979jimmy350]

you can make it work, i am using a flange like that for my rear, I can get a Stock flange for the 14 bolts that it will bolt right up to. As for the transfer case side i designed an adapter to bolt to the 4.25 bolt circle to adapt to the 4.75 bolt circle that the rockwells use and all the newer AAM flanges and axles

 

[obijuan]

hmm sort of like a wheel adapter...

 

[1979jimmy350]

hmm sort of like a wheel adapter...

yea, i have all deminsions off prints from work i just have to make the CNC program for it. The nice thing about that flange diameter it is the same for 1410 1480 and 1550 ujoints

 

[muddybuddy]

get the spicer part numbers, a driveshaft/leaf spring shop for big rigs by me can get all the spicer parts. find a shop that works on big rigs and you will be able to get anything you want from spicer

 

[obijuan]

we have an actual spicer dealer here in town, i just dont want to do the 32 spline front swap on my 205 if i dont have to. is there a 30 spline flange thats got the bolt circle i need? or hell even a 30 spline yoke?

 

[1979jimmy350]

both the 30 and 32 spline flanges have a 4.25 bolt circle this is what size a 1350 double cardian is, if you are looking to run the 1410 flange you need a 4.75 bolt circle so you need to bolt an adapter to the 4.25 bolt circle flange

we have an actual spicer dealer here in town, i just dont want to do the 32 spline front swap on my 205 if i dont have to. is there a 30 spline flange thats got the bolt circle i need? or hell even a 30 spline yoke?