A few months ago I bought a NOS 14bff rear axle. Since I am converting to rear disc, I will not need the drums or backing plate setup.
The ring gear is dated December of 1986 and should be the correct year for the axle.
The backing plates have all the brake hardware including the rear parking brake cables.
The axle has never been installed on any truck (yet) so these parts are unused but they are 24 years old.
Total weight is about 144 pounds.
Drums = 49 lbs. each
Back plates = 23 lbs. each
$100.00 + shipping.
I go to Smithville, Mo. to see family (not sure of next trip) so delivery to the KC area should not be a problem if a time and date can be agreed on.



The ring gear is dated December of 1986 and should be the correct year for the axle.
The backing plates have all the brake hardware including the rear parking brake cables.
The axle has never been installed on any truck (yet) so these parts are unused but they are 24 years old.
Total weight is about 144 pounds.
Drums = 49 lbs. each
Back plates = 23 lbs. each
$100.00 + shipping.
I go to Smithville, Mo. to see family (not sure of next trip) so delivery to the KC area should not be a problem if a time and date can be agreed on.



