Anyone have a link to an online vendor for one of these?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
14bff spindle nut socket??
- Thread starter cuervo
- Start date
Confedneck79K30
3/4 ton status
should just be the large 4 prong, available EVERYWHERE, from vatozone to the tool trucks
sled_dog
1 ton status
It isn't quite the same as the D60 one though. I have used the D60 one in a pinch. I keep a bunch on my truck and haven't matched any of them to a 14 bolt specifically. Need to figure that out sometime.
oldtoyboyd
1/2 ton status
The kent-moore tool number is j-2222-c. Do a search and some online vendor should have an off brand of it.
I used a 6 prong D60 socket on mine yesteday...I didn't have any problems with it.
Confedneck79K30
3/4 ton status
sled, check with otc... they make the ones for rear axles that have the center extension
OTC 1929. Looks like they no longer carry it, or at least don't list it on their web page that I could find.
Lots of web sites still list it though, so I imagine there's some still in the channel.
OBTW, it's 3/4" drive. Serious piece of fricken hardware, that thing
-- A
Yeah, it's not 4 prong and not available EVERYWHERE, not even at napa or autozone, advanced auto, and not even sears.
I just did a search on google for j-2222-c and this thread is third in the listing if that tells you anything. Might just make one for it.
Just incase anyone else needs one before they are all gone. I found them on a vendor on amazon for 40 bucks which is 50 bucks less then anyone else.
http://www.amazon.com/OTC-1929-Bearing-Retaining-Socket/dp/B000XSGKXA
/tiphat for the part numbers guys! A big help once again.
http://www.amazon.com/OTC-1929-Bearing-Retaining-Socket/dp/B000XSGKXA
/tiphat for the part numbers guys! A big help once again.
dana 60 socket and file the inside edges of the tabs just a bit and fits perfectly. use it all the time on 14ff axles more than 60's .
and try here for online socket buy http://www.partsmike.com/store/store.php?crn=226&rn=1389&action=show_detail 60 socket but mod it like i did and will work with both.
and try here for online socket buy http://www.partsmike.com/store/store.php?crn=226&rn=1389&action=show_detail 60 socket but mod it like i did and will work with both.
