bigbadchev84
1/2 ton status
spoo for the 14bff? where is the best place to find one?
CK5
Register an account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members.
14bff spool????
- Thread starter bigbadchev84
- Start date
dont know if its the best place to get a spool, may be the only place right now --- sandy cone of cone engineering.
is 46 spline though. (stock is 30). custom axle shafts are a must, which sandy can supply.
i dont think i want to know how much that would cost.
ryan,
is 46 spline though. (stock is 30). custom axle shafts are a must, which sandy can supply.
i dont think i want to know how much that would cost.
ryan,
sled_dog
1 ton status
Randy's Ring and Pinion carries one. Search on Pirate, plenty of places sell one that uses the stock 30 spline shafts.
walla2k5
1/2 ton status
I think Reider Racing sells a mini spool for the 14ff...
odoa3
1/2 ton status
Put a spool from Randy's in my 14 bolt about a month ago. Haven't got a chance to wheel it yet. Pretty heavy duty. Do a search on here, I put up a couple pics.
Habez
Registered Member
probably the cheapest "spool" you will be able to find is knows as a Lincoln Locker. They can be found all over. (weld it)
smokkey1
1/2 ton status
www.polyperformance.com great guys to deal with.
txfiremank5
1/2 ton status
I remember that. It was a Yukon spool, right? It looked plenty beefy too.odoa3 said:
atho
1/2 ton status
iirc, ouverson engineering makes a mini-spool for the 14b also.
78Suburban
1/2 ton status
would a mini spool be hard to install compared to a detroit?
Emmettology 101
3/4 ton status
I think Sandy Cone offers two types of spools for the 14FF. One is a mini spool that works with a stock 14FF(30 spline). And then he lists one on his site that is 46 spline. Not sure if that one is a full or mini.......
There's a guy on ebay that sells the Yukon full spools. I think they are aroudn $220-$240 now.
There's a guy on ebay that sells the Yukon full spools. I think they are aroudn $220-$240 now.
bigbadchev84
1/2 ton status
what is the best way to go about welding it and not worring about breaking it?
bigbadchev84 said:
Basically, make a solid metal ball out of the spider gears. Essentially the same thing as a mini spool except home made. I wouldn't recommend doing it like they do in the tech article here because a couple people have broken them that way.
Emmettology 101
3/4 ton status
Search for "spiderball"
odoa3
1/2 ton status
txfireman- Yes, it was a Yukon spool. Not too worried about breaking it. 
txfiremank5
1/2 ton status
odoa3 said:txfireman- Yes, it was a Yukon spool. Not too worried about breaking it.
Yeah, by the looks of it you could run over a land mine, blow you rig to smithereens ... and all that would be left would be that spool.
