14ff disc conversion question

[jayweb]

I'm being lazy here, so bear with me - those of you running 1/2 or 3/4 ton calipers on the rear, how are you "clocking" your brackets? 10 and 2?, both pointing forward?, both facing rear? I know its just a matter of looking at where the bleeder screws are on the calipers,and how they will need to be, but I havent torn the truck down yet - still driving it and assembling the 1 ton stuff.

 

[79k20350]

I'm being lazy here, so bear with me - those of you running 1/2 or 3/4 ton calipers on the rear, how are you "clocking" your brackets? 10 and 2?, both pointing forward?, both facing rear? I know its just a matter of looking at where the bleeder screws are on the calipers,and how they will need to be, but I havent torn the truck down yet - still driving it and assembling the 1 ton stuff.

from what ive seen everyone runs them tilting towards the back aboot 10 and 2. Then you just put whatever caliper will point the bleeder up on whatever side it needs to go on...

 

[Chaddy]

here is what I did

 

[K5er4Life]

However you place them, try to do so with the bleeder screw facing up. That way you can bleed them without having to remove the caliper.

 

[jayweb]

thanks, guys - got it figured out. they both have to be clocked towards the rear of the truck.

 

[readymix]

Mine are forward and the bleeders are directly on top.

 

[RootBreaker]

I bought my kit from azkickin but they arent around anymore.... d44 calipers.. but has eldo calipers now